==================================================
License Agreement for DocuPrint C3055/3055DX PCL 6
==================================================

** Terms and Conditions **

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and
   its third party suppliers.  You have no rights in the SOFTWARE
   except as expressly granted in accordance with this agreement.

2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products.  You are not permitted
   to (1) assign, sublicense, sell, rent, lease, convey, or transfer
   the SOFTWARE to any third party by any tangible media such as
   floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE
   on a network or by a telephone line available to the public or (3)
   alter, modify, decompile, disassemble, reverse engineer, or create
   derivative works based on the whole or any part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified, you are required to follow
   such direction.

3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.

4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN
   'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT
   TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND
   MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF
   THE SOFTWARE.  IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL
   PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE
   LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR
   CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO
   USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE.

5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any
   restrictions, laws or regulations imposed by the government of
   respective countries, and are required to obtain
   necessary approval prior to exporting the SOFTWARE.


=====================================================================
FX DocuPrint C3055/3055DX PCL 6
Printer Driver Ver. v2.6.7.1 for
                    Microsoft(R) Windows(R) 2000,
                    Microsoft(R) Windows(R) XP, 
                    Microsoft(R) Windows Server(R) 2003,
                    Microsoft(R) Windows Vista(R),
                    Microsoft(R) Windows Server(R) 2008,
                    Microsoft(R) Windows(R) 7 and
                    Microsoft(R) Windows(R) 8.
=====================================================================

This document provides information about the printer driver on the
following items:
1. Requirements
2. Installation
3. Limitations
4. Version Improvements

-----------------
 1. Requirements
-----------------

   * Please note that this printer driver operates on a computer with 
     a 32-bit x86-based microprocessor (Intel 80486/25 or above) and 
     an upward-compatible processor, running Windows(R) 2000, 
     Windows(R) XP, Windows Server(R) 2003, Windows Server(R) 2008,
     Windows Vista(R) or Windows(R) 7 or Windows(R) 8 English/Korean/
     Simplified Chinese/Traditional Chinese version.
   (For clock speed of the CPU and memory, make sure that the system 
    configuration is recommended by the operating system.)


-----------------
 2. Installation
-----------------
You can install this driver by downloading from our web site.
These methods of installation are described below.

Important
----------
* Close all the running applications before installing the printer
  driver.
* Always reboot the computer after installing an upgraded version of
  the printer driver.
* If you have deleted an older version of the printer driver, always
  reboot the computer before installing the new version.
* The installation procedures are written with the assumption that
  standard settings have been configured in Windows.
  The procedures may differ if the start menu or folder options have
  been changed.
* You may not be able to install correctly if installation is made 
  using Power User rights. Re-install as an Administrator.
* Installation may not be successful if this driver is not installed
  using the following procedure.
* Please refer to the following section of this chapter for driver 
  deletion method under Windows Vista, Windows Server 2008, 
  Windows 7, and Windows 8.
   * About driver deletion method (When using Windows Vista,
     Windows Server 2008, Windows 7, or Windows 8)

To install printer drivers for Windows 2000
--------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Windows 2000, click the "Start" button.  Point to "Settings" and
     click "Printers".  
     Double-click the "Add Printer" icon.  
  2) Specify the printer connection.  
     * For a local printer:
       Select "Local printer".  
       Proceed to step 3).  
     * For a network printer:
       Select "Network printer" and click the "Browse" button.  
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
     If other printers are installed, a message asking whether to set
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
     Proceed to step 10).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name"
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
  7) Specify whether to share this printer with other network users.
  8) A dialog box specifying whether to print the test page after 
     installation is shown.
     To perform test printing on the print driver, load letter paper
     to the printer, select "Yes" and then "Next". 
     Select "No" and click "Next" if you do not wish to print the 
     test page.
  9) A dialog box to confirm the settings is displayed.  Click 
    "Finish" after confirming the settings.  
 10) A dialog box to confirm the continuation of installation is 
     displayed.  
     A message about the Electronic Signature cannot be found will 
     be displayed but this does not cause functional problem.  
     Click "Yes".  
 11) The necessary files are copied and a new printer icon is 
     created.  
     If you have printed the test page, a printer test result 
     confirmation message is displayed.  
     This completes the installation.  

     Next, we set the installed printer options.
 12) Double click the printer icon.
 13) From the "Printer" menu, click "Properties".
 14) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows XP/Windows Server 2003
--------------------------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Click the "Start" button.  Point to "Settings" and click 
     "Printers and Faxes".  
     If you are using Windows XP, click the "Add a printer" icon.  
     If you are using Windows Server 2003, Double-click the 
     "Add Printer" icon.
  2) Specify the printer connection.  
     * For a local printer:
       Select "Local printer attached to this computer".  
       Proceed to step 3).  
     * For a network printer:
       Select "A network printer, or a printer attached to another 
       computer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       If other printers are installed, a message asking whether to 
       set this as the default printer is shown.  
       Click "Yes" button if you want to set a printer as default.
     Proceed to step 10).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
  7) Specify whether to share this printer with other network users.  
  8) A dialog box specifying whether to print the test page after 
     installation is shown.
     To perform test printing on the print driver, load letter paper
     to the printer, select "Yes" and then "Next". 
     Select "No" and click "Next" if you do not wish to print the 
     test page.
  9) A dialog box to confirm the settings is displayed.  Click 
     "Finish" after confirming the settings.  
 10) A dialog box to confirm the continuation of installation is 
     displayed.  

     A message saying that it did not pass the Windows Logo Test will
     be displayed but this does not cause functional problem.
     Click "Continue Anyway".  

 11) The necessary files are copied and a new printer icon is 
     created.  
     If you have printed the test page, a printer test result 
     confirmation message is displayed.  
     This completes the installation.  

    Next, we set the installed printer options.
 12) Double click the printer icon.
 13) From the "Printer" menu, click "Properties".
 14) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows Vista/Windows Server 2008
-----------------------------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Click "Start" button and click "Control Panel".
     Select "Printer" in "Hardware and Sound" then select 
     "Add a Printer".
     <Caution> If you are using Windows Server 2008, right-click in
     "Printers" folder and select "Add Printer" in 
     "Run as administrator".
  2) Specify the printer connection.
     * For a local printer:
       Click "Add a local printer."
       Proceed to step 3).  
     * For a network printer:
       Click "Add a network Wireless or Bluetooth printer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       Proceed to step 9).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
     Note:When a network folder is specified, it may result in an 
          error.  Therefore, copy the driver to install to a local 
          folder in advance and specify it.  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     You can set the printer as the default printer by checking the 
     check box displayed under "Printer Name". 
  7) You can continue with the installation in the "User Account  
     Control" dialog box. Click the "Continue" button to proceed.
     For users without administrator rights who wish to install the 
     driver, select the option of user with administrator rights, 
     enter the password and then click "OK". 

     Please ignore the pop-up dialogue of "Windows can't verify the
     publisher of this software". Click "Install this driver software
     anyway." to continue with the installation.

  8) When the driver is installed through "Run as Administrator", the
     dialogs for common settings are displayed.  
     Specify common settings in the dialogs and click "Next".
  9) The driver installation is completed.
     To perform test printing on the print driver, load letter paper
     to the printer and click "Print a test page" button. 

     Next, we set the installed printer options.
 10) Double click the printer icon.
 11) From the "Printer" menu, click "Properties".
 12) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows 7, Windows 8
-----------------------------------------

  1) Activate the "Add Printer Wizard".  
     Click "Start" button and click "Devices and Printers".
     Select "Add a Printer".
  2) Specify the printer connection.
     * For a local printer:
       Click "Add a local printer."
       Proceed to step 3).  
     * For a network printer:
       Click "Add a network Wireless or Bluetooth printer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       Proceed to step 9).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
     Note:When a network folder is specified, it may result in an 
          error.  Therefore, copy the driver to install to a local 
          folder in advance and specify it.  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     You can set the printer as the default printer by checking the 
     check box displayed under "Printer Name". 
  7) You can continue with the installation in the "User Account  
     Control" dialog box. Click the "Continue" button to proceed.
     For users without administrator rights who wish to install the 
     driver, select the option of user with administrator rights, 
     enter the password and then click "OK". 

     Please ignore the pop-up dialogue of "Windows can't verify the
     publisher of this software". Click "Install this driver software
     anyway." to continue with the installation.

  8) When the driver is installed through "Run as Administrator", the
     dialogs for common settings are displayed.  
     Specify common settings in the dialogs and click "Next".
  9) The driver installation is completed.
     To perform test printing on the print driver, load letter paper
     to the printer and click "Print a test page" button. 

     Next, we set the installed printer options.
 10) Double click the printer icon.
 11) From the "Printer" menu, click "Properties".
 12) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

About driver deletion method 
(When using Windows Vista, Windows Server 2008, Windows 7, or Windows 8)
-------------------------------------------------------------
To remove drivers from system completely, please delete drivers and driver 
package going through the following steps.
Please note that driver package can not be deleted by executing driver 
uninstall tool.

  <<Windows Vista, Windows Server 2008>>
   * Click "Start" and open "Control Panel", then select "Printer" in
     "Hardware and Sound" panel.
   * Delete printer icon in "Printers" folder.
   * Right-click in "Printers" folder and select "Run as 
     Administrator".
     Click "Server Properties" then "Printer Server Properties" 
     window is displayed.
   * Select the driver to be deleted from the "Driver" tab and click 
     "Remove" button.
   * Select "Remove driver and driver package.", then click "OK" 
     button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and 
     try to delete again.   
   * Restart the computer.

  <<Windows 7, Windows 8>>
  <<Windows 7>>
  * Click "Start" and select "Devices and Printers".  
  <<Windows 8>>
  * Go to "Control Panel" > "Hardware and Sound" and select "Devices and 
    Printers".
  * Click the printer icon in the "Devices and Printers" folder, 
    and select "Remove device" menu to delete it.   
  * Click any of the icons displayed in "Printers and Faxes" in the
    "Devices and Printers" folder and select "Print server properties".  
  * Click the "Drivers" tab to open it.  
  * When the "Change Driver Settings" button is displayed, click it.  
  * Select a driver to delete from the "Drivers" tab and click the "Remove" 
    button.  
  * Select "Remove driver and driver package" and click the "OK" button.  
  * When the driver is in use, a message appears and the driver package
    may not be able to be deleted.  In such case, reboot the computer and 
    try to delete again.   
  * Restart the computer.

About driver installation method using plug-and-play
(When using Windows 7 or Windows 8)
-------------------------------------------------------------
When a driver is installed using plug-and-play, it may not
be installed properly.  In such case, follow the steps below to reinstall 
the driver. 

  * Select "Devices and Printers".
  * In the "Devices and Printers" folder, right-click the icon of this 
    printer and select "Properties".  
    *When the icon is disabled and inoperable, turn off/on the printer
     and make sure the printer is connected securely with a cable.  
  * Select this printer in "Device Functions" in the "Hardware" tab, and
    click the "Properties" button to open the Properties dialog. 
  * Click the "Change settings" button and open a new "Properties" dialog.  
  * In the new "Properties" dialog, open the "Driver" tab, and click the 
    "Update driver" button to open the "Update driver software" dialog.  
  * Select "Browse my computer for driver software" and specify 
    the driver's location under "Search for driver software in this 
    location:". Click "Next".
    *Please refer to the steps for driver installation using "Add Printer 
    Wizard" for how to prepare the driver.   
  * When a message stating that the driver has been updated successfully,  
     click "Close" to close the dialog.  
     Now, the driver has been reinstalled successfully.  


----------------
 3. Limitations
----------------

============================
Driver-Specific Limitations
============================

When installing multiple drivers to a single SMB port
=====================================================
When installing multiple drivers to a single SMB port, follow the
procedure mentioned below.
  1) Double-click the "Add Printer" icon to display the "Add Printer
     Wizard" screen.  
     Activate the "Add Printer Wizard" and click "Next".
  2) Select "Local Printer" and click "Next".
  3) Select the SMB port to be connected from "Available
     ports" and click "Next".
  4) Double-click "Have Disk", specify the folder in which you have
     saved the driver and carry out the installation as per the
     instructions.

Local Printer for Windows XP, Windows Server 2003
==================================================
When "\\server\printer\ (LAN Manager port)" is used in the local 
printer for Windows XP and Windows Server 2003, if printing is 
executed when the printer is offline, the local printer may not
be able to recover from the offline mode.
If this happens, delete the LAN Manager port and reset the local
printer settings.
If LAN Manager port is used in the network printer, there should not
be any problem.
When setting the local printer, use other ports except LAN Manager
or delete the existing LAN Manager port before creating the
"\\server\printer (local port)" at the "New Port" of the
"Add Printer Wizard".

Installing network printer in Microsoft Windows Vista(R) and
Microsoft Windows Server(R) 2008
============================================================
* When installing network printer by "Run as Administrator", the
  printer may be added under the administrator account used for
  installation and not under the current user.

Driver installation by remote access on Microsoft Windows Vista(R)
and Microsoft Windows Server(R) 2008
===================================================================
In the case of driver installation by remote access on Windows Vista
or later versions, the process may not end normally.  In such case,
try again on Windows XP.

Notice to the users in the Microsoft Windows Server 2003/2008
cluster environment
======================================================================
* Use the following OS for Client.
  Microsoft(R) Windows(R) XP (English version)
  Microsoft(R) Windows Server(R) 2003 (English version)
  Microsoft(R) Windows Server(R) 2008 (English version)
  Microsoft(R) Windows Vista(R) (English version)
  Microsoft(R) Windows(R) 7 (English version)

* When you specify Custom Paper Size in the cluster environment,
  make same setting at all of the physical node in the environment.

* When clicking the "Get Information from Printer" button,
  if the "Search Printer" dialog is displayed, select "Specify Address"
  and enter the network address of the printer.

* Driver Installation in the cluster environment
(A) Microsoft Windows 2000 Server, Microsoft Windows Server 2008
    Install the driver on each of standby node and active node, and
    then install it on virtual server.

(B) Microsoft Windows Server 2003
    Install the driver on virtual server.

* Deletion of driver in the cluster environment
(A) Microsoft Windows 2000 Server
    After the driver on the virtual server is deleted, delete the 
    drivers on all standby nodes.  

(B) Microsoft Windows Server 2003/2008
    Delete the driver on virtual server, and then delete it on each 
    standby node.
 * To delete driver on standby node
  ----------
  (b-1) Change standby node to active node.
  (b-2) Install a printer on virtual server.
  (b-3) Delete the driver on the virtual server.

 * To delete driver
  ----------
  Delete printer icon first and delete the driver from "Server Properties".
  Then reboot the computer.

Number of Copies
================
This driver allows you to print from 1 to 999 copies.  Only one
copy will be printed if the number of copies specified exceeds this
range.

Watermark Printing
==================
When performing watermark printing with "Transparent" specified,
some of the colors that appear on the screen may be different when
actually printed.

Print Booklet and Print Header/Footer functions
===============================================
When the page number printing is simultaneously specified for Print
Booklet function and Print Header/Footer function, the page
numbers may not be printed properly.

Limitations during EMF Spooling
===============================
When the "EMF Spooling" on the "Detailed Settings" tab is set to "On",
the following functions may not operate properly.
When using these functions, set the "EMF Spooling" to "Off".
* Print Header/Footer
* Secure Print
* Sample Print
* Create Forms (Register Forms and Print Overlay will operate 
  properly.)
* Use Document Monitor
* Specify Job Owner
* Use Extended Features From Application
* Specify Margin

Printing Huge Print Data
========================
For some applications, if a pasted image is printed at high
resolution, the print data expands and may result in an extremely
slow printing speed.
The print data size of the output may be improved by changing the
following settings of "Other Settings (Graphics Settings)" on
the "Detailed Settings" tab.
* Change "Resolution".
* Change "Image Compression".

Skip Blank Pages
================
Even with "Skip Blank Pages" selected, blank pages may still be
printed in the following situations.

* The page contains only line feeds.
* The page contains only spaces.
* The page contains only line feeds and spaces.
* A white background drawing instruction is sent from the
  application.

Font Substitution
=================
If a size equal or larger than 36 points is specified, the document
may be printed with incorrect font substitution.

Printing Bold Fonts
====================
When printing documents with bold fonts, the thickness of the 
characters printed from Windows 2000 and Windows XP and Windows 
Server 2003/2008 and Windows Vista may vary. 

Missing Items in the Printout
=============================
In some applications, images may be missing in the printout.
If this happens, activating EMF spooling as shown below may remove
the problem.

* Set "EMF Spooling" to "On" on the "Detailed Settings" tab.

Custom Paper Size
=================
Administrator rights are necessary for changing the setting of
Custom Paper Size.
When using Windows Vista or Windows Server 2008, please modify
printer properties according to the following steps.
* Select the printer from the printer folder.
* Right-click the printer, click "Run as administrator" and then 
  select "Properties".
* Click the "Continue" button in the "User Account Control" dialog
  box, and from the displayed properties, configure the settings.

For Windows 7, select the printer from the "Devices and Printers" folder,
and select "Properties".  On the "Sharing" tab, click the "Change 
Sharing Options" button.
After that, specify custom page size.  

Favorites
=========
When only a margin setting is changed, "Change" is not displayed in
the "Favorites" combo box.

Printer Error
=============
An error may occur at the printer if one of the following situations
occurs during printing.  Follow the instructions on the printer UI or
the user guide to resolve the error.

* Driver properties from the application program are not displayed.
* Printer settings on the application program are not reflected in
  the driver properties when displayed.
* Printer settings are changed midway in a document.  (E.g. document
  which has different paper sizes for every page.)
* Continuous printing from multiple application programs.
* When an optional device that was not installed to the printer was
  specified at the "Options" tab.

Compatibility with Printer Font
===============================
If a document using the printer fonts of other machine models is
printed through this driver, then the results of printing will
be different.

Print Overlay
=============
The alphabetical "Form Name" specified in the "Print Overlay" is
case sensitive.
Specify the correct case sensitive form name registered in the
printer.

As some applications paint the background in white to print, forms
with overlay may be hidden.  Such applications include Internet
Explorer and WordPad.

About searching for a printer by "Community Name"
=================================================
With the default setting of firewall on Windows Vista and Windows
Server 2008, you can't search for a printer across subnets by
"Broadcast". In this case, please specify the address directly
by selecting "Specify Address".

===================
Client Environment
===================

Multi-language Document
=======================
If a multi-language document is created using the multi-language
support function, you should select "Always Use TrueType Fonts" on
the "Fonts" dialog box before printing. When printing with printer
fonts, non-Japanese texts such as Greek, Croatian, etc. may be
printed incorrectly.

Notes on Windows 8
=======================
* On Windows 8, Annotation and Watermark may not be printed even if 
 [Header/Footer Options] and [Watermarks] are specified.
 To make them function, set [EMF Spooling] to [On] on the 
 [Detailed Settings] tab.

* When printing from the application running in the new UI environment 
  suitable for touch controls, which was introduced on Windows 8, if 
  [Black and White] is displayed as Output Color on the printing setting 
  screen, which is displayed after a printer is selected from the device 
  charm, the output will be in black and white even if the setting is 
  changed to [Color(Auto)].
  To output in color, open [Devices and Printers] on Windows desktop, 
  right-click on the printer you use to select [Printing Preferences], 
  and in the [Default Setting] dialog, change [Output Color] on the 
  [Paper / Output] tab back to [Color(Auto)].


-------------------------
 4. Version Improvements
-------------------------
This section describes the modifications made for each upgraded
version.

[Improvements from Ver 2.6.1]
* Supported "Windows Vista".

[Improvements from Ver 2.6.2]
* Solved the problem that when creating Forms, abnormal end or hang-up
  of application may occur depending on folders to save the Forms in
  the situation where Internet Explorer in Protection mode is running
  on Windows Vista.
* Solved the problem that user details etc. may not be correctly
  reflected when outputting with [Prompt User for Settings] specified
  in the situation where Internet Explorer in Protection mode is running
  on Windows Vista.

[Improvements from Ver 2.6.3]
* Fixed the problem that the models of the print driver in the same product
  series may not be upgraded normally on Windows Vista.
* Improved the phenomena of print failure from a particular application.
* Fixed the issue that documents containing a reversed image may not be
  output normally.
* Fixed the bug of a possible error when accessing the driver from an
  external tool.
* Fixed the issue that printing may not be performed normally through
  the application programs or services running on Local System Account.
* Fixed the issue that Printing Preferences specified by an application
  program may become invalid.
* Fixed the issue that the driver may not be upgraded correctly and printing
  may be disabled when a shared printer is used on Windows2000 terminal server.
* Improved the situation where installation to Windows Vista may fail.

[Improvements from Ver 2.6.5]
* Windows 7 has been supported.
* Fix the issue of TrueType Glyph problem
* Fix the problem to delete personal setting information at the time 
of shared printer icon deletion.
* Fix the problem about an exception error in the addition printer.

[Improvements from Ver 2.6.6]
* Windows 8 has been supported.

=====================================================================
"Microsoft", "MS-DOS", "Windows", "Windows Server" "Windows Vista" 
are registered trademarks of Microsoft Corporation, U.S.A in the 
United States and other countries.
"Intel" and "Pentium" are registered trademarks of Intel
Corporation, U.S.A.
Other product names and companies' names are the registered
trademarks or trademarks of their respective owners.
Copyright (C) 2009-2012 Fuji Xerox Co., Ltd.  All rights reserved.
