
                       ----------------------------------------------------
                         Using Guide of Diagnostic Tool NDTOOL for Netdog
                                 (İڱļĺ沿)
                       ----------------------------------------------------

                       Copyrights (c)  1999 , Rainbow Goldensoft Co., Ltd. 

============
About NDTOOL
============

    NDTOOL is a Diagnostic Tool for Netdog, and is a "Dog Client" tool program.
NDTOOL can do the following things.

1) Set mode of communication on "Dog Client" for 32-bit WINDOWS system, and make
   GSNETDOG.INI file. Please refer "Developer's manual" (NETDOG.DOC) to understand 
   the functions and using method of this file.

2) Monitor "Dog Server", and can get the name of "Dog Server", version, computer name 
   running "Dog Server", operating system and its version. And also the status of 
   "Dog Server".

   NDTOOL may be provided to your end-users with your protected application(s).

====================
Suitable environment
====================
   This tool is 32-bit Windows application, and is a "Dog Client". It is suitable for  
1) Windows NT 3.5 and above, Server and WorkSation
2) Windows 95/98

   This tool supports IPX, TCP/IP and NetBIOS protocol. Thus, it's going to work whenever 
the "Dog Client" and the "Dog Server" is configured with the same protocol. 

=======================
Generating GSNETDOG.INI
=======================

Selecting "Tools" / "Make GSNETDOG.INI" commands from the menu, it will get the default 
option of GSNETDOG.INI. Change these options to suit your own requirements. 

Options Explained:

    Protocol Select         Choose network protocol to be used by NDTOOL
       IPX                  Select IPX 
       TCP/IP               Select TCP/IP 
       NETBOIS              Select NetBios/NetBEUI 

    IPX                     IPX protocol options
       Bindery              Select Bindery mode of IPX
       BroadCast            Select broadcast mode of IPX to communicate with 
                              "Dog Server". 

    NetBIOS                 NetBIOS protocol options
       LanaNum              NetBIOS network device number, ranges from 0 - 9. If only one 
                              network card is used, 0 is the normal selection. 
       NetBIOS Name         The NetBios name of "Dog Server" with the format as: 
                              NetDogSrvXXXXXX, where XXXXXX is the serial number of the Dog. 

    TCP/IP                  TCP/IP protocol options
       BroadCast            Select broadcast mode of TCP/IP to communicate with "Dog Server".
       TCP/UDP              Select TCP/UDP communication mode
       Static IP            Set "Dog Server" static IP address. If the "Dog Server"'s IP 
                              address is not in the same segment with "Dog Client", the 
                              communication will pass through routers. 
       IP Address           "Dog Server" IP address. 

=======================
Monitoring "Dog Server" 
=======================
    Selecting "Tools" / "Monitor Server" from NDTOOL's menu, there are three buttons in the 
operation dialogue box: 
1)  Server Info
    -----------
    Function: Obtain information of "Dog Server".

    If the following result is returned, explanation is at the right:
    DogServer nameNDSRVWNT.EXE          --  Name of "Dog Server"
    DogServer version1.1                --  Version of "Dog Server"
    DogServer OS nameWindows NT         --  Operating system of "Dog Server"
    DogServer OS version5.0             --  Version of Operating system of "Dog Server"
    Protocol supportIPX TCP/IP NETBOIS  --  Protocols supported by "Dog Server"

Caution:  If you are not familiar with your network environment, or there isn't enough 
          network knowledge, please do not use the customized searching method come with 
          GSNETDOG.INI.

2)  License Info
    ------------
    Function: Obtain License information of "Dog Server".

    If the following result is returned, explanation is at the right:
         The max license user number is: 10    -- Maximum user number is 10
         The using license user number is: 2   -- Current user number is 2

3)  Delete User
    -----------
    Function: Delete license user number occupied by this computer.
 
    This function deletes license user number occupied by this computer's other 
    application(s) with compulsive method and releases relative resources. This 
    function is only recommended if the protected application is crashed and need 
    to release user resoureces but do not want to reboot "Dog Server".

-------
Caution
-------
A.  NDTOOL tool is also a "Dog Client", but do not to be counted as one user. 
B.  While monitoring "Dog Server", NDTOOL takes some time when searching for "Dog Server"
    at the first time, ranges from 1-20 seconds depending on your network environment. 
C.  NDTOOL can be used as a simple test tool to verify whether "Dog Server" is working 
    properly. 
D.  If you have just finished generating GSNETDOG.INI file, NDTOOL tool will use it to 
    search for "Dog Server". 

=================
Technical Support
=================
    For technical issues, please contact Rainbow GoldenSoft Co., Ltd. or its distributors 
immediately. 
    For contact information, please see Address.txt under installation path.

=========================================================================
  "Dog" is trademarks of Beijing Goldensoft Co., Ltd., which is authorized to 
Rainbow Goldensoft Co., Ltd. in software protection products.



FOLLOWING IS CHINESE VERSION OF THIS FILE.




                       ----------------------------------
                         繷Ϲ NDTOOL ʹ˵
                       ----------------------------------

                 Ȩ (c)  1999  ʺϢ޹˾
==============
NDTOOL
==============

    繷ϹNDTOOL һͻ˵Ĺ¹

     1  Win32ͻͨŵķʽõ GSNETDOG.INI ļļô÷
        ʹ˵ NETDOG.DOC
     2  ӡԵõķ֡汾ţ
        ĻϵͳͰ汾ţԵõ״̬

    NDTOOL ߿ṩû

========
û
========

    ģΪ Win32 Ӧó򣨡ͻˣ
    IBM PC 386/486/PENTIUM ϵмϵͳ

       Windows NT 3.5 ϵServerWorkSation
       Windows 95/98

    ֧ IPX Э顢TCP/IP ЭNetBIOSЭ飬˿ͻ˻ˣָС
    ͻĻˣָСĻֻҪװͬЭ
    ɡ


=================
 GSNETDOG.INI
=================

    ڹѡ˵ <Tools>/<Make GSNETDOG.INI>õ GSNETDOG.INI Ĭ
    ѡ޸ЩѡԷԼҪ

    ѡͣ

    Protocol Select         ѡʹõЭ
       IPX                  ѡʹ IPX Э
       TCP/IP               ѡʹ TCP/IP Э
       NETBOIS              ѡʹ NetBIOS/NetBEUI Э

    IPX                     IPX Эѡ
       Bindery              ʹ IPX  Bindery ʽ
       BroadCast            ʹ IPX Ĺ㲥ʽ롰ͨ

    NetBIOS                 NetBIOS Эѡ
       LanaNum              NetBIOS 豸ţѡ 0 - 9ֻ
                                һѡ 0
       NetBIOS Name         NetBIOSʽΪNetDogSrvXXXXXX
                                XXXXXXΪϵкš

    TCP/IP                  TCP/IP Эѡ
       BroadCast            ʹTCP/IPĹ㲥ʽ롰ͨš
       TCP/UDP              ѡʹ TCP/UDP ʽͨ
       Static IP            ַַָ롰ͻ˲
                                ͬһϣͨŽ͸·
       IP Address           IPַ


================
ӡ
================

     NDTOOL ѡ˵ Tools / Monitor ServerԻť

    1  Server Info
       ܣ   õϢ

       õ½£

         DogServer nameNDSRVWNT.EXE          --  
         DogServer version1.1                --  汾
         DogServer OS nameWindowsNT          --  ϵͳ
         DogServer OS version5.0             --  ϵͳ汾
         Protocol supportIPX TCP/IP NETBOIS  --  ֵ֧Э

    ע
             ˽绷û㹻֪ʶҪʹ
       GSNETDOG.INIƲҡ

    2  License Info
       ܣ   õûʹϢ

       õ½£

         The max license user number is10    --  ûΪ10
         The using license user number is2   --  ĿǰʹõûΪ 2

    3  Delete User
       ܣ  ɾռõû

       ܿǿƵķɾռ繷ûԴ
       ƼڱϵͻҪͷûԴֲ
       

    ע

       1  NDTOOL ȻҲһͻ˳򣬵ǲռһû
       2  NDTOOL ڼӡʱ򣬵һѰҡʱҪһʱ䣬
          ʵʵ绷Ҫ 1 - 20 룬
       3  NDTOOL Ϊ򵥵ĲԳ硰Ƿ
       4  ո GSNETDOG.INI NDTOOL ߽ʹ 
              GSNETDOG.INI ļҡ


========
֧
========

    ⣬ʺع˾ֹ˾ϵ
    ϵַ뿴װĿ¼Ŀ¼Address.txtļ



	""Ǳչ޹˾ע̱꣬Ȩʺ
Ϣ޹˾ʹá
