Arc in non-Vector Files

Use the Arc option to define an arc in the drawing and calculate its arc center, radius, diameter, and arc length.

From the Analysis menu, select Measure.

The Measurement dialog box appears displaying the measurement options.

Note: From the AutoVue toolbar, you can also click Measure .

Click the Arc tab.

In the Arc Info section, select a unit of measurement from the Length list in which to measure the length of the arc.

In the Measured Angle section, select a unit of measurement from the Sweep Units list measure the angle of the arc.

Click points on the drawing to define the arc.

The points are joined by an arc. The measurements for center point coordinates, radius, diameter, arc length, start and end of angle, and sweep appear in the Arc tab.

Note: Click Reset to take another measurement.

Click Close to close the Measurement dialog box.