Measuring an Angle

From the Analysis menu, select Measure.

The Measurement dialog box appears.

Note: From the AutoVue toolbar, you can also click Measure .

Click the Angle tab.

Select From 3 Points if you want to measure the angle between three points. Snapping modes are displayed.

Select the snapping modes that you want to use for measuring.

To select all snapping modes click All On.

To deselect all snapping modes click All Off.

Select Between 2 lines if you want to measure the angle between two lines.

From the Measured Angle Units list, select the unit in which you want to measure the angle.

If you selected From 3 Points, click three points to define the angle.

If you selected Between 2 Lines, click two lines to define the angle.

Angle arms appear with an arc connecting them. The angle measurement appears in the Measurement dialog box.

Note: Click Reset to take another measurement.

Click Close to close the Measurement dialog box.