##############################################################################
##
## FLASH WIZARD localization file
## !!! DO NOT LEAVE ANY TEXT LINE EMPTY:
## !!! ALWAYS PUT THE COMMENT "#" POUND AT THE BEGINNING OF UNUSED LINES
##
## !!! NO SPACES at the end of text lines! Spaces will be added automatically
##
##############################################################################
##
English
English translation by Musicbob
www.satnews.tv.it
##
###############################################
## Hello msg + Principal buttons text         #
###############################################
##
Welcome to FlashWizard PRO! Written by MusicBob - www.satnews.tv.it
Install a firmware into FLASH memory
Install or remove a firmware in MULTIBOOT
Configuration and Utilities
Install automatically an image in flash memory
Install or remove automatically an image on multiboot
FlashWizard configuration and utilities panel
About FlashWizard...
##
###############################################
## "Install on Flash memory" window           #
###############################################
##
Install on FLASH
Drag&&Drop a file here, or open folder: 
Recent firmwares
Connect
Settings Backup
Sending Firmware
Sending AutoFlashErase procedure
Initializing Flash memory
Writing and verifying Cramfs memory partition
Rebooting Dreambox
Restoring settings
Settings copy
Settings Backup
Drag and drop here an image file to install (or one from the recent box)
Recently installed images. Right mouse button for options menu
Are you sure you want to install
is not a valid firmware file.
is not a firmware that can be installed in flash.
It is too big for flash memory, try to install it in multiboot mode.
not connected
Unable to connect to address
Invalid Login or Password.
Possible reason: maybe new firmware has different login and/or password.
Please check connection parameters.
Installing
connected to
Finished. Total time
minutes and
seconds.
Installing of firmware
successfully terminated.
Kill enigma before installing (recommended)
Switching DreamBox to stand-by mode...
blocks rewritten
##
################################################
## Texts to be displayed on Enigma window      #
## NO SPACES HERE !!!                          #
## !!! Be sure to put %20 instead of spaces!!! #
################################################
##
Installing%20firmware
Please%20wait...
Finished!%20%20Total%20time:%20
%20minutes%20and%20
%20seconds.
##
################################################
## "Install in Multiboot" window               #
################################################
##
Install on MULTIBOOT
Install image
Utilities
Drag&&Drop a file here, or open folder:
Connecting to Dreambox
Sending image
Installing
Image setup and init
Set new image as default choice on FlashWizard PRO boot menu
Restart Dreambox when finished
on flash:
on multiboot:
Remove
Rename
Boot
Telnet Here!
Checking devices...
Autodetect...
not found
No images found on
installed images on
Format Usb
Mount Usb
Image installed successsfully!
##
The Boot Menu of FlashWizard PRO is not installed
on flash image. Do you want to install it now?
Boot Menu installed successfully. Multiboot install enabled.
Multiboot disabled:
you must install the BootMenu for having it enabled.
Choose install device:
Unable to install: no devices found, or all disabled.
##
You can't remove the currently loaded and 
running image (pointed by the red arrow).
No changes were made.
##
Do you really want to delete
Deleting image
##
################################################
## "Configuration and Utilities" window        #
################################################
##
FlashWizard Configuration and Utilities
Connecting parameters
Settings
Language
Utilities
No Dreambox services files found in the selected folder.
Please, select another directory.
Warning: "satellites.xml" file is not present!
copy settings from a given directory
also copy the programmed recordings list (TimerList)
Services folder:
Send all services now!
< choose a directory >
Format Usb Stick
Reset
Software
Hardware
Remove FlashWizard Pro
FlashWizard PRO has been removed from the flash image.
##
################################################
## Various Strings (errors and more)           #
################################################
##
A new release of FlashWizard is available!
Do you want to download it from the official site?
Unable to create temp work directory!
You must login on Windows as System Administrator
to have the permission to create files and folders.
transferred bytes
Please, choose a services directory and select one of the files to confirm:
Please select a Dreambox firmware to install (image files [*.IMG]):
Sending services...
Connecting...
All services sent successfully.
##
No free space available to install
a new image in multiboot.
##
Name of the image
Rename the image
New name for the image:
The entered name is already present, please retry.
Error while installing.
Wait please...
Dreambox rebooted.
Deleting...
##
Opens SmartTelnet window on the root directory of the selected image.
Delete selected image from multiboot menu
Rename selected image (22 characters max)
Drag&&Drop an image file here to install it in multiboot
Images installed on multiboot.
No image installed yet.
Base image on flash memory, kernel version shown between brackets.
Set the image as default choice on FlashWizard Pro boot menu on next restart
Click here to refresh all informations about the images installed
##
WARNING: file "satellites.xml" was not found in settings files.
##
is selected and
set as default boot image on next restart.
Reboot Dreambox now?
Are you sure you want to reboot?
Enigma has started the soft reboot procedure.
Dreambox will be rebooted in a few seconds.
##
## FORMAT E MOUNT USB:
##
Usb stick successfully mounted
Mounting error. Usb Stick not found or not yet formatted!
Unable to unmount the Usb Stick.
Probably the currently running image is not the flash image.
Or another program is using it (FTP or Telnet clients)
To format the Usb Stick, you must boot from the flash image.
Are you sure you want to format the Usb Stick?
Connecting
Usb Stick successfully formatted and linked
Unable to format and mount the Usb Stick!
No Usb Stick found!
Available free space:
##
########
##
A powerful firmware installer for Dreambox, with channels,
bouquets, settings, addons and timerlist copy and restore options.
FlashWizard allows to install Dreambox images directly from 
Windows desktop via drag and drop, performing automatically
all the needed procedures (including reboot and flash erase).
No more buttons to press on Dreambox panel!
Images can be installed in Flash memory or Multiboot, on Hard Disk
and/or Usb Stick and/or Compact Flash, even together: they will be
automatically recognized at boot-up time.
FlashWizard allows also to make complete Backups of the installed
images, both for flash memory and multiboot, that can be restored
at anytime, even on other dreamboxes than yours.
FlashWizard PRO has his own boot menu in 256 colors, that 
allows to display the boot logo (the starting picture) also for
the images installed in multiboot on all devices.
And, more, the VCR Scart output is enabled by FlashWizard PRO
boot menu, even at boot time.
Written by MusicBob - Official support forum:
http://www.satnews.tv.it/vbforum/forumdisplay.php?f=28
###
### BACKUP RESTORE ######
###
Image Backup
Flash Image Backup
Size
Performing image backup, wait please...
Not enough space for performing backup!
For this image, you need
Checking size...
Displays the size of the selected image
Performs automatically the complete backup of the selected image
Checking free space...
FlashWizard is ready to start the backup of
Path of the image:
Temp space needed for the backup
Copying files...
Archiving image...
Backup successfully completed!
is a flash memory backup, it can't be installed on multiboot.
You should restore it from the "Install in FLASH" window.
is a multiboot backup, it can't be installed in flash memory.
You should restore it from the "Install on MULTIBOOT" window.
##
Sure to restore the backupped image
Free space needed is
Not enough free space for restoring on
You need
free space, try to delete some installed image(s).
Ready to begin the restoring of
Temporary space needed for restoring
##
Unable to restore: not enough free space for temp files.
Restoring image, please wait...
Reading of the archive...
Finishing restore...
Restore successfully completed!
Save backup as:
Reading Jffs2 partition...
Copying file...
Reading Cramfs partition...
Erasing Jffs2 partition...
Writing Jffs2 partition...
Erasing Cramfs partition...
Writing Cramfs partition...
Dreambox is rebooting the new image.
Warning: DO NOT flash erase!!
Performs automatically a complete backup of the flash image
FlashWizard update
Check if available on official site
No new version available yet.
Services/Favourites Backup and Restore
include the TimerList
Receive and save dreambox's services
Choose a folder
Services successfully saved in folder
##
#### NEW in 4.5
##
A different FlashWizard PRO version has been detected on
your flash image, and will be automatically reinstalled.
Copy text to clipboard (CTRL-C)
Paste text from clipboard (CTRL-V)
Logo
Choose a new logo for the selected image
The selected file is not a valid Logo file.
New Logo successfully saved.
Error while writing the logo file..
Insert a new Logo for the selected image (will be visible on next reboot)
SmartSettings Copy from active image
Could not find the "enigma" directory
(maybe the currently active image is a Neutrino)
Unable to do the SmartSettings copy procedure.
##
#### NEW in 5.0
##
Error while restoring the backup!
is probably corrupted, please remove.
Preparing to delete...
NFS enable
Pc export:
Pc IP:
Do you wish to disable NFS on FlashWizard menu?
Please, input first your NFS mount data:
name of the shared directory and your computer's IP.
Warning, data input error:
the IP of this computer cannot be the same of the Dreambox!
Advanced SmartCopy
The items listed below (files and folders) will be copied
from the active image to the new one during install process.
To delete, select an item then right click on it.
Enter the full path of the file, or the directory, to be copied to the
new image (example: /var/tuxbox/plugins), then press "Add" button.
Warning: do not input too generic paths to copy, be specific.
Add
Software Restart
##
#### NEW in 5.1
##
Remove from the list
Open the relative folder
Delete
free
used
Error while copying files procedure.
Files are corrupted or not enough space on device.
The following files found to be corrupted or empty
during the install procedure (squashfs bug?):
Error: unable to open the file.
Set attributes for all transferred files too
Please input a valid FTP path in the text box.
delete before
Delete the file on the dreambox before transfer, if already exists
cd after
Change to copied file's directory when finished
Error while transferring
FTP transfer terminated.
Kill enigma and retry
Continue
Abort
##
#### NEW in 7o2o BETA
##
Format CF
Mount CF
Are you sure you want to format the CF?
Format Compact Flash:
Compact Flash formatted and linked successfully.
Compact Flash mounted successfully
Can't find any Compact Flash inserted into the slot!
Unable to format and mount the Compact Flash!
Error while mounting. Compact Flash not found or not formatted!
Available free space:
Unable to umount the Compact Flash.
Probably the currently running image is not the flash image.
Or another program is using it (FTP or Telnet clients)
To format the compact flash, you must boot from the flash image.
This is not (yet) supported on
Can't install this image on flash on
Install of images/backups NFI/OE is not (yet) supported on
##
#### NEW in 6
##
The image you want to install is compressed with LZMA?
Error in new version check:
Reading JBK file...
Error while reading JBK file.
Add
Remove
WordPad
Reload all
Save
Cancel
RTF infos file:
BMP bkgnd picture:
Link to a web site:
<none>
Select a rich text file .RTF
Select a bitmap picture ,BMP
Load a backup description in .RTF file format
Remove the RTF file
Load a background picture in .BMP file format
Remove the BMP picture
Run WordPad and load or create the RTF file
Reload all files and update the editor's window
Insert a link to a web page (will open browser by clicking on editor's window)
All files successfully saved!
Do you wish to add text/graphic infos
using Image InfoWizard tool?
Finalizing backup...
Visit our home page:
##
#### NEW in 6.2
##
Reading FW2 file...please wait...
This FW2 file is not readable by FlashWizard version
Check on official site for most recent program updates.
Select a sound file midi, mp3 or wav
Music file:
Load a background music file
Remove the music file
Devices to use (Multiboot)
USB stick
Hard Disk
Compact Flash
Select the devices to use to install images on Multiboot
disabled
##
#### NEW in 6.3
##
Select Dreambox:
Name:
IP:
Login:
Password:
###############################################################
# 
# Choose Here the Character set most suitable for your Country
# Put one of these possible values:
# 
# DEFAULT	the default charset
# SHIFTJIS	Japanese shift-JIS characters.
# HANGEUL	Korean characters (Wansung).
# JOHAB		Korean characters (Johab). Not available on NT 3.51
# GB2312	Simplified Chinese characters (mainland china).
# CHINESEBIG5	Traditional Chinese characters (Taiwanese).
# GREEK		Greek characters. Not available on NT 3.51.
# TURKISH	Turkish characters. Not available on NT 3.51
# VIETNAMESE	Vietnamese characters. Not available on NT 3.51.
# HEBREW	Hebrew characters. Not available on NT 3.51
# ARABIC	Arabic characters. Not available on NT 3.51
# BALTIC	Baltic characters. Not available on NT 3.51.
# RUSSIAN	Cyrillic characters. Not available on NT 3.51.
# THAI		Thai characters. Not available on NT 3.51
# EASTEUROPE	Includes diacritical marks for east european countries. Not available on NT 3.51.
#
DEFAULT
###############################################################
##
##
## END_OF_FILE :-)
##
################################################
