======================================================
License Agreement for DocuCentre S1810/S2010
======================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.
   
2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in your country.  You are
   not permitted to (1) assign, sublicense, sell, rent, lease, convey,
   or transfer the SOFTWARE to any third party by any tangible media
   such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the
   SOFTWARE on a network or by a telephone line available to the
   public or (3) alter, modify, decompile, disassemble, reverse
   engineer, or create derivative works based on the whole or any
   part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction. 
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS'
   BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
   FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
   YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER
   HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE.
   IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS,
   AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR
   ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR
   DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY
   MODIFICATION OF THE SOFTWARE.  
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any restrictions,
   laws or regulations imposed by the government of your country or
   any other relevant countries, and are required to obtain necessary
   approval prior to exporting the SOFTWARE.


=============================================================================
Additional Information:
FUJI XEROX DocuCentre S1810/S2010
Printer Driver Version 2.6.11.0 for
                    Microsoft(R) Windows(R) XP Professional x64 Edition,
                    Microsoft(R) Windows Server(R) 2003 x64 Editions,
                    Microsoft(R) Windows Vista(R) x64 Editions,
                    Microsoft(R) Windows Server(R) 2008 x64 Editions,
                    Microsoft(R) Windows(R) 7 x64 Editions and
                    Microsoft(R) Windows Server(R) 2008 R2.
=============================================================================
This document provides information about the printer driver on the
following items: 

1. Requirements
2. Installation
3. Limitations
4. Software Upgrade from the Earlier Version
5. Software Update


 1. Requirements
=================
   * Please note that this printer driver operates on a computer with a
     64-bit x86-based microprocessor and an upward-compatible processor,
     running x64 Version of Windows(R)XP or Windows Server(R) 2003 or
     Windows Vista(R) or Windows Server(R) 2008 or Windows(R) 7 or
     Windows Server(R) 2008 R2.


 2. Installation
=================
   * Refer to the driver user guide provided.  


 3. Limitations
================
============================
Driver-Specific Limitations
============================

Watermark Printing(1)
=====================
When "Repeat Watermark" checkbox on the "New Watermark" dialog or 
the "Edit Watermark" dialog is checked and the text specified for 
Watermark is long, the Watermark may not appear on the preview and 
not be printed.
To print the Watermark, check off the "Repeat Watermark" checkbox or 
specify a shorter text.

Watermark Printing(2)
=====================
Watermarks are not drawn in the print result with a part of applications.
When this happens, set the "EMF Spooling" on the "Advanced Settings" to "Available".

Layout Settings
================
If layout settings such as "Specify Zoom", "Multiple-Up", "Poster", 
"Booklet Creation", and "Fit to New Paper Size" are set at the printer 
driver, the print result of patterns or graphics may be different from 
what you see on the screen. 
In such case, perform printing after clearing the layout settings.

Printer Error
==============
An error may occur at the multifunctional machine if one of the following 
situations occurs during printing. Follow the instructions on the 
multifunctional machine UI or the user guide to resolve the error.  

* Driver properties from the application program are not displayed.  
* Printer settings on the application program are not reflected in 
  the driver properties when displayed.  
* Printer settings are changed midway in a document. (E.g. document 
  which has different paper sizes for every page.)
* Continuous printing from multiple application programs.  
* When an optional device that was not installed to the printer was 
  specified at the "Options" tab.  

Skip Blank Pages
=================
Even with "Skip Blank Pages" selected, blank pages may still be 
printed in the following situations.  
* The page contains only line feeds.  
* The page contains only spaces.  
* The page contains only line feeds and spaces.  
* A white background drawing instruction is sent from the application.  

=================================
Application-Specific Limitations
=================================

All Applications
=================

* For some applications, if any other window is laid over the dialog displayed by the 
  application during printing, images, texts may be missing in the printout. 
  If this happens, perform printing without having any other window laid over the dialog.

* When the output image of patterns or graphics is different from what you see
  on the screen, the discrepancy may be dissolved by changing the following settings of
  "Other Settings (Graphics Settings)" on the "Advanced Settings" tab as below.
  * Set "Change All Color to Black" to "Graphic Only" or "Text + Graphic".
  * Set "Thicken Fine Line" to "On".
  * Set "Paint Only Enclosed Areas" to "Disable".
  * Change "Resolution".
  * Change "Halftone Print".

Changing the following settings on the "Image Options" tab may also make an improvement.

  * Change "Image Quality".

* When you use USB and print documents that require time to be processed for printing, 
  the documents may not be printed properly.
  To print the documents properly, select "Spool print documents so program finishes 
  printing faster" and "Start printing after last page is spooled" on the "Advanced" tab 
  in the printer properties.

Adobe Acrobat
====================
Adobe Reader
====================
Changing the following settings may improve the printing result if 
the printed output is different from what you see on the screen.  

* Check the "Print Image" at the print dialog box of the application 
  before printing.

Microsoft Office
===================
When printing is performed from Microsoft Office, the document name 
displayed on the multifunctional machine may not be correct.  

Microsoft Word
===================
 If the paper size is specified to A4 or Letter, the print job may be performed with the paper
size opposite to the setting.
In such case, clear the check box for the settings below in the Word options.

In the case of using Word2007
	"word options" -> "Advanced" -> "Print"
	-> "Scale content for A4 or 8.5x11 paper size"

In the case of using Word2000/2003
	"options" -> "print" tab
	-> "Allow A4/Letter paper resizing"

========================
OS-Specific Limitations
========================
Printer icon in the "Devices and Printers" folder may be displayed with an exclamation mark (!)
on Windows Vista and Windows7.
That exclamation mark (!) will disappear after the scan driver is installed.


 4. Software Upgrade from the Earlier Version
=============================================

2.6.11.0
--------
* Initial version


 5. Software Update
===================
    The latest software is available on our web site.

         http://www.fxap.com.sg/

    Communication charges will be borne by the customer.


=====================================================================
Microsoft is the registered trademark of Microsoft Corporation.
Windows is the registered trademark of Microsoft Corporation.
Adobe, Adobe Acrobat and Adobe Reader are trademarks of 
Adobe Systems Incorporated.  
Other names of products and companies are the trademarks or
registered trademarks of each company.
Copyright 2012 Fuji Xerox Co., Ltd. All rights reserved.
----------------------------< End of File >--------------------------
