Home > Scan > Scan from Your Computer (Windows®) > Scan Using ControlCenter4 Home Mode (Windows®) > Scan Both Sides of an ID Card Using ControlCenter4 Home Mode (Windows®)

Scan Both Sides of an ID Card Using ControlCenter4 Home Mode (Windows®)

Select Home Mode as the mode setting for ControlCenter4.

  1. Place an ID card on the scanner glass.
  2. Click the (ControlCenter4) icon in the task tray, and then click Open.
  3. Click the Scan tab.
  4. Under Document Type, select Custom, and then click the Custom Settings button.
    The Custom Scan Settings dialog box appears.
  5. Select the ID Card Scan check box.
    The instruction dialog appears.
  6. Read the instructions on the screen, and then press OK.
  7. Configure other Custom Scan Settings, if needed.
  8. Click OK.
  9. Click (Scan).
    The machine starts scanning one side of the identification card.
  10. After the machine has scanned one side, turn over the identification card, and then click Continue to scan the other side.
  11. Click Finish.
Related Information

Go to top of page