Home > Scan > Scan from Your Computer (Macintosh) > Scan Using ControlCenter2 (Macintosh) > Scan Both Sides of an ID Card Using ControlCenter2 (Macintosh)

Scan Both Sides of an ID Card Using ControlCenter2 (Macintosh)

  1. Place an ID card on the scanner glass.
  2. In the Finder menu bar, click Go>Applications>Fuji Xerox, and then double-click the (ControlCenter) icon.
    The ControlCenter2 screen appears.
  3. Click the SCAN tab.
  4. Click the File button.
    The scan settings dialog box appears.
  5. Select the ID Card Scan check box.
    The instruction dialog appears.
  6. Read the instructions on the screen, and then press OK.
  7. Configure other settings, if needed.
  8. Click the Start Scanning button.
    The machine starts scanning one side of the identification card.
  9. After the machine has scanned one side, turn over the identification card, and then click Continue to scan the other side.
  10. Click Finish.
Related Information

Go to top of page