No password is required by default. Type a password if you have set one.

You can use BRAdmin Light or Web Based Management to change and set your password.

If your computer is protected by Windows® Firewall and is unable to use Remote Setup, you may need to configure the firewall settings to allow communication through port numbers 137 and 161.

If you are using Windows® Firewall and you installed Multi-Function Suite from the Installer CD-ROM, the necessary firewall settings have already been set.

If you need to change the Fuji Xerox machine that was registered to your Macintosh during the installation of Multi-Function Suite, or if your network environment has changed, you must specify the new Fuji Xerox machine. Open the Device Selector and select the new machine.

To open the Device Selector, click the Model pop-up menu in the ControlCenter2 screen, and then select Other....