Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management > Configure the SNTP Protocol Using Web Based Management


. 
Option | Description |
|---|---|
Status | Displays whether the SNTP protocol is enabled or disabled. |
SNTP Server Method | Select AUTO or STATIC.
|
Primary SNTP Server Address Secondary SNTP Server Address | Type the server address (up to 64 characters). The secondary SNTP server address is used as a backup to the primary SNTP server address. If the primary server is unavailable, the machine will contact the secondary SNTP server. |
Primary SNTP Server Port Secondary SNTP Server Port | Type the port number (1-65535). The secondary SNTP server port is used as a backup to the primary SNTP server port. If the primary port is unavailable, the machine will contact the secondary SNTP port. |
Synchronization Interval | Type the number of hours between server synchronization attempts (1-168 hours). |
Synchronization Status | Confirm the latest synchronization status. |
Go to top of page