Machine’s basic settings

> > >

You change the machine’s setting set in the machine from Lenovo Easy Printer Manager or Embedded Web Server.

If your machine is connected to the local, you can set the machine’s setting from Lenovo Easy Printer Manager > Advanced Setting > Device Settings (see Using Lenovo Easy Printer Manager ).
If your machine is connected to the network, you can set themachine’s setting from Embedded Web Server > Settings tab > Machine Settings (see Using Embedded Web Server).

After installation is complete, you may want to set the machine's default settings.

To change the machine’s default settings, follow these steps:


	It may be necessary to press OK to navigate to lower-level menus for some models.

Select the option you want, then press OK.

Power Save: When you are not using the machine for a while, use this feature to save power.


	When you press the Power button, start printing is received, the product will wake up from the power saving mode. Press (Menu) > System Setup > Machine Setup > Wakeup Event > On on the control panel. When you press any button except Power button, the machine wake up from the power save mode.

Altitude Adj.: Print quality is affected by atmospheric pressure, which atmospheric pressure is determined by the height of the machine above sea level. Before you set the altitude value, determine the altitude where you are (see Altitude adjustment).