                     CPAV.INI File Definitions
    
    
    The purpose of the CPAV.INI file is to tell Central Point
    Anti-Virus which options to use on startup. This file is
    most useful for network administrators who want a quick way
    to change options for many users.
    
    The INI file consists of two sections:  Options and Install
    Options. The Options section defines the program
    configuration and scanning options. The Install Options
    section defines the options set during installation of the
    stand-alone Central Point Anti-Virus. If you have Central
    Point Anti-Virus as part of the PC Tools Pro package, ignore
    this section.
    
    To examine or edit the CPAV.INI file, open it using any text
    editor.
    
    
    Parts of the CPAV.INI File
    ============================
    
    [Options]
    
    Fast_Detection = 1
    Specifies how thoroughly Central Point Anti-Virus checks files.
    0=Scans a file bit by bit
    1=Scans the virus-accessible portion of a file
    
    NOTE: This option is available for testing purposes. We recommend you
    leave the setting on 1 or the file scan will be extremely slow.
    
    Auto_Save = 1
    Specifies whether to save configuration when you exit.
    0=Does not save on exit
    1=Saves on exit
    
    Beginner_Mode = 0
    Specifies which menu structure Central Point Anti-Virus
    uses.
    0=Full Menus
    1=Express Menu
    
    No_Scan_Stop = 0
    Specifies if the usual means of stopping a Detect, Clean, or
    Analyze scan is enabled.
    0=Allows a user to stop the scan
    1=Prevents the user from stopp the scan.
    
    Disable_Hotkey = 0
    Specifies if a user has access to the VSafe control window
    with its hot key.
    0=Allows the use of a hot key
    1=Disables VSafe hot key
    
    No_Continue = 0
    Specifies if the Continue button in Virus Found and Verify
    Error dialog boxes is enabled.
    0=Allows user to continue without taking an action if a
    virus is found
    1=Disables users ability to continue if a virus is found
    
    No_Update = 0
    Specifies if the Update button in Verify Error dialog boxes
    is enabled.
    0=Allows user to update a file with verification error
    1=Disables ability to update SmartCheck files
    
    Network_Access = 1
    Specifies if network drives can be scanned.
    0=Does not allow access to network drives
    1=Allows access to network drives
    
    Detection_Only = 0
    Allows users to detect viruses only. Disables the following
    functions:  Clean, Immunize, Remove Immunization, and Delete
    SmartCheck Files from the Scan menu.
    0=Allows cleaning if a virus is found
    1=Disables cleaning if a virus is found
    
    Check_All_Files = 1
    Checks all files for viruses.
    0=Checks executable files only
    1=Check all files including data files
    
    Anti_Stealth = 0
    Checks for stealth viruses.
    0=Does not use the Anti-Stealth method to search for viruses
    in files
    1=Uses the Anti-Stealth low-level check for viruses
    
    Scan_Compressed = 1
    Scans files that are compressed with most of the common
    file-compression utilities:  PKLITE (Version 1.13 and
    earlier), PKZIP (Version 1.1 and earlier), LZEXE, and ARJ.
    0=Does not scan compressed files
    1=Opens compressed files, scans, and closes
    
    Analyze_and_Detect = 1
    Uses the Virus Analyzer during a detect scan to look for
    virus code in the internal structure of scanned files.
    0=Does not use the Virus Analyzer
    1=Uses the Virus Analyzer
    
    Prompt_while_Detect = 1
    Specifies that the Virus Found dialog box appears whenever
    an infected file is found during a detect scan.
    0=Does not prompt when an infected file is detected
    1=Prompts users for input when an infected file is detected
    
    Create_Infreport = 1
    Stores detailed information about any virus found and action
    taken during a scan in a file located in the \REPORTS
    subdirectory.
    0=Does not create the infection report
    1=Creates the virus infection report
    
    Create_Report = 0
    Creates a report file after Central Point Anti-Virus takes
    any action. The file, named CPAV.RPT, is an ASCII text file
    located in the root directory of the selected work drive,
    and cannot be created in any other directory.
    0=Does not create the local report in the root of the
    scanned drive or media
    1=Creates the local report in the root of the scanned drive or media
    
    Create_Backup = 0
    Specifies that the program makes a backup of any infected
    file before it is cleaned and renames it with the extension
    .VIR.
    0=Does not make a backup file
    1=Makes a backup before cleaning
    
    Disable_Alarm = 0
    Specifies if an alarm sounds when a Central Point Anti-Virus
    warning message appears.
    0=Sounds alarm when a virus or verification alert is issued
    1=Disables alarm
    
    Fast_Verify = 1
    Specifies that the integrity of a file is verified only if
    the file size has changed.
    0=Checks all selected files whether or not their time, date,
    size, or attributes have changed
    1=Checks files only if size has changed
    
    New_Floppies = 0
    Specifies if a SMARTCHK.CPS file is created for each
    directory on a floppy disk as it is scanned.
    0=Does not create SmartChecks on floppies
    1=Creates SmartChecks on floppies
    
    New_Checksums = 1
    Specifies if a file called SMARTCHK.CPS is created for each
    directory as it is scanned.
    0=Does not create SmartChecks on hard disks
    1=Creates SmartChecks on hard disks
    
    Verify_Integrity = 1
    Compares files to the SmartCheck file created by the Create
    New SmartChecks option and alerts you of any changes.
    0=Disables CPAV's ability to verify executable files for changes
    1=Checks all executable files for changes which could indicate a
    virus
    
    Network_Message = text_string
    Provides a message up to 40 characters to be displayed
    whenever a virus is found or a files integrity is in
    question.
    
    Password = text_string
    Provide a password to prevent users from using Full Menus,
    or changing the following options:
    *    Options (access to the Option Settings dialog box)
    *    Alert message
    *    Verification exceptions
    *    Immunization exceptions
    *    Network Messages
    
    ShowIcon=1
    Shows the Central Point Anti-Virus icon while in Windows
    0=No
    1=Yes
    
    VSAFE_RunProg =tsr2nlm.exe
    Allows VSafe to communicate virus alerts to the Master NLM
    if Central Point Anti-Virus for NetWare is running on the
    network.
    
    VSAFE_WRunProg =wtsr2nlm.exe
    Allows VSafe to communicate virus alerts to the Master NLM
    in Windows if Central Point Anti-Virus for NetWare is
    running on the network.
    
    Create_Audit=1
    Specifies if an audit trail containing a log of any VSafe
    alerts is created.
    0=Does not create the VSafe audit trail report
    1=Creates VSafe audit trail
    
    Audit_Name=AUDIT.CPS
    Specifies the name of the VSafe audit trail file.  AUDIT.CPS
    is the default, stored in the directory where you installed
    Central Point Anti-Virus.
    
    Chkfile=SMARTCHK.CPS
    Specifies the name of the SmartCheck files created when
    Central Point Anti-Virus performs a scan (as long as the
    Create New SmartChecks option is on).
    
    Vsafe_rehook=1
    Allows virus protection on networks with VSafe. The VSafe
    line in the AUTOEXEC.BAT should follow network drivers and
    come before the login command.
    0=Does not rehook interrupts after Novell drivers hook them
    1=Rehooks interrupts after Novell drivers load
    If VSafe is to be used in a network environment,
    the variable should be 1 in order for VSafe to recognize 
    network drives.
    
    Check_AltCtrlDel=1
    Specified whether memory-resident VSafe checks the boot
    sector of the disk in drive A before rebooting.
    0=Does not let VSafe check for CTRL-ALT-DEL
    1=VSafe checks for floppy in drive A before rebooting is allowed
    
    Havetoupdate=180
    Displays a notice to update the product after 180 days.
    
    Tsafe_Options = /1+/2+/3-/4+/5-/6+/7+/8+/NE
    When the hot key is disabled, VSafe ignores any changes you make
    to the default command-line options when it loads. This option
    allows network administrators to change the VSafe default settings
    when the hot key is disabled. Specify the command-line syntax as it
    is documented in the printed manual in the Ongoing Virus Protection
    chapter.
    
    
    NOTE:  The following options are for the Custom Install
    feature, which allows you to make custom install disks for
    various workstations in the company. You must have either a
    site license for the number of workstations in question or
    have purchased the number of stand-alone packages to cover
    each computer. The install options also do not apply if you
    have PC Tools Pro.
    
    
    [install_options]
    
    Scheduler = 1
    Specifies whether to load the resident scheduler program in
    memory.
    0=Does not load scheduler
    1=Loads scheduler
    
    Wsinstall = 1
    Allows the Install program to add a group and icons to
    Windows. 
    0=No
    1=Yes
    
    Noinstall = 0
    Allows users to perform installations 
    0=Yes
    1=No  
    If 'No' then only allow the creation of the emergency disk.
    
    Customized = 0
    Enables the Customized Install option. This is used to make
    disk sets from an initial install.
    0=No
    1=Yes
    
    Autooptions = 0
    Sets options automatically. This allows you to install
    quickly.
    0=No
    1=Yes
    
    Scantimeout = x
    Installs BootSafe and specifies the number of days to elapse
    until you are prompted to scan your drive. This is the same
    as using the /Tx option.
    
    Updatepath = 1
    Allows the Central Point Anti-Virus install program to
    update the path in the AUTOEXEC.BAT file.
    0=No
    1=Yes
    
    Scanprompt = 0
    Prompts the user if a virus is found.
    0=No
    1=Yes
    
    Autodetect = 0
    Configures Central Point Anti-Virus to scan on startup.
    0=No
    1=Yes
    
    Bootsafe = 1
    Runs BootSafe each time you start your computer.
    0=No
    1=Yes
    
    Resident = 1
    Loads VSafe or VWatch in memory.
    0=No resident protection
    1=Loads VSafe as a TSR
    2=Loads VSafe as a driver
    3=Loads VWatch as a TSR
    4=Loads VWatch as a driver
    
    Upgradeonly = 0
    Copies new files without modification to existing
    configuration.
    0=No
    1=Yes





