CANON SOFTWARE LICENSE AGREEMENT

IMPORTANT!

This is a legal agreement ("Agreement") between you and Canon Inc. 
("Canon") and governing your use of Canon's software programs 
including the related manuals or any printed material thereof  
(the "Software") for certain Canon's copying machines, printers and 
multifunctional peripherals (the "Products").

READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND RESTRICTIONS 
DESCRIBED IN THIS AGREEMENT BEFORE USING THE SOFTWARE. BY THE ACTION 
TO INDICATE YOUR ACCEPTANCE OR USING THE SOFTWARE, YOU AGREE TO BE 
BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT 
AGREE TO THE FOLLOWING TERMS AND CONDITIONS OF THIS AGREEMENT, DO 
NOT USE THE SOFTWARE. NO REFUND WILL BE MADE BECAUSE THE SOFTWARE 
WAS PROVIDED TO YOU AT NO CHARGE.


1.  GRANT OF LICENSE
Canon grants you a personal, limited and non-exclusive license to 
use ("use" as used herein shall include storing, loading, 
installing, accessing, executing or displaying) the Software solely 
for the use with Products only on computers directly or via network 
connected to the Products (the "Designated Computer").
You may allow other users of other computers connected to your 
Designated Computer to use the Software, provided that you must 
assure that all such users shall abide by the terms of this 
Agreement and shall be subject to restrictions and obligations borne 
by you hereunder.

You may make one copy of the Software solely for a back-up purpose.

2.  RESTRICTIONS
You shall not use the Software except as expressly granted or 
permitted herein, and shall not assign, sublicense, sell, rent, 
lease, loan, convey or transfer to any third party the Software.
You shall not alter, translate or convert to another programming 
language, modify, disassemble, decompile or otherwise reverse 
engineer the Software and you shall not have any third party to do 
so.

3.  COPYRIGHT NOTICE
You shall not modify, remove or delete any copyright notice of Canon 
or its licensors contained in the Software, including any copy 
thereof.

4.  OWNERSHIP
Canon and its licensors retain in all respects the title, ownership 
and intellectual property rights in and to the Software.  Except as 
expressly provided herein, no license or right, express or implied, 
is hereby conveyed or granted by Canon to you for any intellectual 
property of Canon and its licensors.

5.  EXPORT RESTRICTION
You agree to comply with all export laws and restrictions and 
regulations of the country involved, and not to export or re-export, 
directly or indirectly, the Software in violation of any such laws, 
restrictions and regulations, or without all necessary approvals.

6.  NO SUPPORT
NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR 
DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS ARE RESPONSIBLE FOR 
MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR 
SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE.

7.  NO WARRANTY AND DISCLAIMER OF INDEMNITY
[NO WARRANTY]  THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF 
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE 
DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, 
REPAIR OR CORRECTION. SOME STATES OR LEGAL JURISDICTIONS DO NOT 
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION 
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS 
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR 
JURISDICTION TO JURISDICTION.

NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR 
DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS WARRANT THAT THE 
FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR 
THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR 
FREE.

[NO LIABILITY FOR DAMAGES] IN NO EVENT SHALL EITHER CANON, CANON'S 
SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS DEALERS OR CANON'S 
LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT 
LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION, 
LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USE THEREOF OR 
INABILITY TO USE THE SOFTWARE EVEN IF EITHER CANON, CANON'S 
SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, DEALERS OR CANON'S 
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME 
STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR 
EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR 
PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF 
SELLER, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

[RELEASE OF LIABILITY] TO THE FULL EXTENT PERMITTED BY APPLICABLE 
LAW, YOU HEREBY RELEASE CANON, CANON'S SUBSIDIARIES AND AFFILIATES, 
THEIR DISTRIBUTORS, DEALERS AND CANON'S LICENSORS FROM ANY AND ALL 
LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE 
SOFTWARE OR ITS USE.

8.  TERM
This Agreement is effective upon your acceptance hereof by the 
action to indicate your acceptance or using the Software and remains 
in effect until terminated. You may terminate this Agreement by 
destroying the Software including any and all copies thereof. This 
Agreement shall also terminate if you fail to comply with any terms 
hereof. Upon termination of this Agreement, in addition to Canon 
enforcing its respective legal rights, you must then promptly 
destroy the Software including any and all copies thereof.
Notwithstanding the foregoing, Sections 4, and 7 through 11 shall 
survive any termination of this Agreement.

9.  U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE
The Software is a "commercial item," as that term is defined at 
48 C.F.R. 2.101 (October 1995), consisting of "commercial computer 
software" and "commercial computer software documentation," as such 
terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 
48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 
(June 1995), all U.S. Government End Users shall acquire the 
Software with only those rights set forth herein. Manufacturer is 
Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.

10.  SEVERABILITY
In the event that any section hereof is declared or found to be 
illegal by any court or tribunal of competent jurisdiction, such 
section shall be null and void with respect to the jurisdiction of 
that court or tribunal and all the remaining provisions hereof shall 
remain in full force and effect.

11.  ACKNOWLEDGEMENT
BY THE ACTION TO INDICATE YOUR ACCEPTANCE OR USING THE SOFTWARE, YOU 
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND 
AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT 
THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT 
BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND 
SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND 
ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE 
SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE 
EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON.


Should you have any questions concerning this Agreement, or if you 
desire to contact Canon for any reason, please write to Canon's 
sales subsidiary or distributor/dealer, serving the country where 
you obtained the Products.

Canon Inc.


Supplement

====================================================================

Copyright 2007 Canon, Inc.

Canon Printer Software for Windows 2000/XP/Vista
Version: 1.30
June 2007

====================================================================

This file provides information not included in the Software User's 
Guide. This information may be helpful in diagnosing potential 
problems with your Canon printer.

Contents:

1. General Notes
2. The printer does not print.
3. Application Notes

1. General Notes:

- Make sure that "Enable bidirectional support" is enabled in the 
  Ports tab in the printer properties dialog box.

2. The printer does not print:

The problem is likely due to one of the following reasons:

- You disconnected the printer from the USB port while this software 
  is still running.

- You connected a different printer than the printer to the USB port 
  assigned to the printer while this software was running.

- Your USB cable is defective, or it is too long. Please replace 
  your cable with a new one that is not longer than 5 meters.

3. Application Notes: 

- Some applications may not correctly print multiple copies when 
  collating is enabled. If you experience this problem, please 
  uncheck the collating option in the Print Setup dialog.

- Microsoft Word may not always print multiple copies correctly when 
  the Collating option is disabled in the Print Setup dialog. If you 
  experience this problem, please enable the Collating option.

- When printing multiple copies of a document from Corel Draw, 
  please make sure the Collating option in the Print Setup dialog is 
  enabled.

- When printing multiple copies of a document from Microsoft Word, 
  AND using the Zoom options Pages per Sheet and Scale to Paper Size 
  in the Print Setup dialog, the document may not print correctly. 
  It is recommended that these options are set in the Printer 
  Properties Page Layout tab instead.

- A document which contains multiple page formats (i.e. A4 and Letter) 
  may not print correctly. To avoid this problem, please use the same 
  page format for all pages in the document.

- When an "@" character is used in the name of the printer, 
  the printer will become unrecognizable by the operating system 
  because of an invalid printer name thus disabling printing, 
  operation and setup.

- When you log on to an Administrator account that is different from 
  the one used to install the software, you will not be able to 
  access the driver properties with Administrator privileges. 
  To access the driver properties, select [Run as Administrator].

- In certain applications, thickness of a line can be set to a value 
  smaller than 1pt but the actual thickness in the printout may be 
  equivalent to that of an 1pt line.

- Some applications may not print correctly when scaling is set to a 
  value other than 100% in the Printer Setup or Properties dialog. 
  In this case, please set scaling to 100%. If the application has 
  its own scaling function, please set scaling from within the 
  application.

- For Windows Vista, the Windows help application (WinHlp32.exe) is 
  required to display its Online Help. If the Windows help 
  application (WinHlp32.exe) is not installed on your system, 
  download it from the Microsoft Corporation website.
  For details on the download methods, click [Help] in the printer 
  driver, and then see the [Windows Help and Support] dialog box.

<End of File>
