==================================================
License Agreement for DocuPrint 2065/3055 PCL 6
==================================================

** Terms and Conditions **

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and
   its third party suppliers.  You have no rights in the SOFTWARE
   except as expressly granted in accordance with this agreement.

2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products.  You are not permitted
   to (1) assign, sublicense, sell, rent, lease, convey, or transfer
   the SOFTWARE to any third party by any tangible media such as
   floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE
   on a network or by a telephone line available to the public or (3)
   alter, modify, decompile, disassemble, reverse engineer, or create
   derivative works based on the whole or any part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified, you are required to follow
   such direction.

3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.

4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN
   'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT
   TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND
   MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF
   THE SOFTWARE.  IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL
   PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE
   LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR
   CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO
   USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE.

5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any
   restrictions, laws or regulations imposed by the government of
   respective countries, and are required to obtain
   necessary approval prior to exporting the SOFTWARE.


=====================================================================
FX DocuPrint 2065/3055 PCL 6
Printer Driver Version  2.6.10
=====================================================================

This document provides information about the printer driver on the
following items:
1. Requirements
2. Limitations
3. Version Improvements

-----------------
 1. Requirements
-----------------

 Please note that this print driver operates on a computer running on 
the following operating system.

    Microsoft(R) Windows(R) XP Professional
    Microsoft(R) Windows Server(R) 2003
    Microsoft(R) Windows Vista(R)
    Microsoft(R) Windows Server(R) 2008
    Microsoft(R) Windows(R) 7
    Microsoft(R) Windows Server(R) 2008 R2
    Microsoft(R) Windows(R) 8
    Microsoft(R) Windows Server(R) 2012
    Microsoft(R) Windows(R) 8.1
    Microsoft(R) Windows Server(R) 2012 R2
    Microsoft(R) Windows(R) 10

 Please visit our web site to check the latest software and supported
operating systems.


----------------
 2. Limitations
----------------
============================
Driver-Specific Limitations
============================

When installing multiple drivers to a single SMB port
=====================================================
When installing multiple drivers to a single SMB port, follow the
procedure mentioned below.
  1) Double-click the "Add Printer" icon to display the "Add Printer
     Wizard" screen.  
     Activate the "Add Printer Wizard" and click "Next".
  2) Select "Local Printer" and click "Next".
  3) Select the SMB port to be connected from "Available
     ports" and click "Next".
  4) Double-click "Have Disk", specify the folder in which you have
     saved the driver and carry out the installation as per the
     instructions.

When shared printer clients use an OS other than the one supported
by the main driver, substitute drivers for every OS are required.
Make sure this substitute driver's version is the same as the main driver.
Substitute drivers cannot be installed if the version is different.

Also, shared printer clients cannot use the following OS.
* Windows XP before SP2
* Windows Server 2003 before SP1
* Windows 2000
When these OS are used as client to install shared printers,
Properties from Printer Folder can no longer be opened.

Local Printer for Windows XP, Windows Server 2003
==================================================
When "\\server\printer\ (LAN Manager port)" is used in the local 
printer for Windows XP and Windows Server 2003, if printing is 
executed when the printer is offline, the local printer may not
be able to recover from the offline mode.
If this happens, delete the LAN Manager port and reset the local
printer settings.
If LAN Manager port is used in the network printer, there should not
be any problem.
When setting the local printer, use other ports except LAN Manager
or delete the existing LAN Manager port before creating the
"\\server\printer (local port)" at the "New Port" of the
"Add Printer Wizard".

Installing network printer in Microsoft Windows Vista(R) and
Microsoft Windows Server(R) 2008
============================================================
* When installing network printer by "Run as Administrator", the
  printer may be added under the administrator account used for
  installation and not under the current user.

Driver installation by remote access on Microsoft Windows Vista(R)
and Microsoft Windows Server(R) 2008
===================================================================
In the case of driver installation by remote access on Windows Vista
or later versions, the process may not end normally.  In such case,
try again on Windows XP.

Notice to the users in the Microsoft Windows Server 2003/2008
cluster environment
=============================================================
* When you specify Custom Paper Size in the cluster environment,
  make same setting at all of the physical node in the environment.

* When clicking the "Get Information from Printer" button,
  if the "Search Printer" dialog is displayed, select "Specify Address"
  and enter the network address of the printer.

* Driver Installation in the cluster environment
(A) Microsoft Windows Server 2008
    Install the driver on each of standby node and active node, and
    then install it on virtual server.

(B) Microsoft Windows Server 2003
    Install the driver on virtual server.

* Deletion of driver in the cluster environment
Microsoft Windows Server 2003/2008
  Delete the driver on virtual server, and then delete it on each
  standby node.
  To delete driver on standby node
  ----------
  (b-1) Change standby node to active node.
  (b-2) Install a printer on virtual server.
  (b-3) Delete the driver on the virtual server.

  To delete driver
  ----------
  Delete printer icon first and delete the driver from "Server Properties".
  Then reboot the computer.

About the "Cancel" button of "Enter User Details" dialog
========================================================
When printing after "Prompt User for Entry when Submitting Job" 
is set in "Detailed User Settings" dialog and the "Enter User Details" dialog
is cancelled, a warning dialog is displayed.
It may indicate a printer error message, although there is no error
in the printer.
In this case, ignore the warning message and continue operation.

Number of Copies
================
This driver allows you to print from 1 to 999 copies.  Only one
copy will be printed if the number of copies specified exceeds this
range.

Watermark Printing
==================
When performing watermark printing with "Transparent" specified,
some of the colors that appear on the screen may be different when
actually printed.

For Windows XP SP2, Windows Server 2003 SP2, Windows Server 2008,
Windows Vista and Windows 7.
"Watermarks" cannot be used from a 32-bit application when 
"Advanced Settings" tab's "EMF Spooling" is set to "Not Available".
Please set "EMF Spooling" to "Available" before using.

About Restrict Annotation Setting
=================================
For Windows XP SP2, Windows Server 2003 SP2, Windows Server 2008, Windows Vista
and Windows 7.
"Restrict Annotation Setting" cannot be used from a 32-bit application
when "Advanced Settings" tab's "EMF Spooling" is set to "Not Available".
Please set "EMF Spooling" to "Available" before using.

Print Booklet and Print Header/Footer functions
===============================================
When the page number printing is simultaneously specified for Print
Booklet function and Print Header/Footer function, the page
numbers may not be printed properly.

Limitations during EMF Spooling
===============================
When the "EMF Spooling" on the "Detailed Settings" tab is set to "On",
the following functions may not operate properly.
When using these functions, set the "EMF Spooling" to "Off".
* "Secure Print","Sample Print"
* "Enable Account Setup" and "User Details Setup"
* "Create/Register Forms"
* "Covers/Separators"'s "Insert Separators"
* "Use Extended Features From Application"
* "Specify Margin"

Printing Huge Print Data
========================
For some applications, if a pasted image is printed at high
resolution, the print data expands and may result in an extremely
slow printing speed.
The print data size of the output may be improved by changing the
following settings of "Other Settings (Graphics Settings)" on
the "Detailed Settings" tab.
* Change "Resolution".
* Change "Image Compression".

Skip Blank Pages
================
Even with "Skip Blank Pages" selected, blank pages may still be
printed in the following situations.

* The page contains only line feeds.
* The page contains only spaces.
* The page contains only line feeds and spaces.
* A white background drawing instruction is sent from the
  application.

Font Substitution
=================
If a size equal or larger than 36 points is specified, the document
may be printed with incorrect font substitution.

Missing Items in the Printout
=============================
In some applications, images may be missing in the printout.
If this happens, activating EMF spooling as shown below may remove
the problem.

* Set "EMF Spooling" to "On" on the "Detailed Settings" tab.

Custom Paper Size
=================
Administrator rights are necessary for changing the setting of
Custom Paper Size.
When using Windows Vista or Windows Server 2008, please modify
printer properties according to the following steps.
* Select the printer from the printer folder.
* Right-click the printer, click "Run as administrator" and then 
  select "Properties".
* Click the "Continue" button in the "User Account Control" dialog
  box, and from the displayed properties, configure the settings.

For Windows 7, select the printer from the "Devices and Printers" folder,
and select "Properties".  On the "Sharing" tab, click the "Change 
Sharing Options" button.
After that, specify custom page size.  

Favorites
=========
When only a margin setting is changed, "Change" is not displayed in
the "Favorites" combo box.

Printer Error
=============
An error may occur at the printer if one of the following situations
occurs during printing.  Follow the instructions on the printer UI or
the user guide to resolve the error.

* Driver properties from the application program are not displayed.
* Printer settings on the application program are not reflected in
  the driver properties when displayed.
* Printer settings are changed midway in a document.  (E.g. document
  which has different paper sizes for every page.)
* Continuous printing from multiple application programs.
* When an optional device that was not installed to the printer was
  specified at the "Options" tab.

Compatibility with Printer Font
===============================
If a document using the printer fonts of other machine models is
printed through this driver, then the results of printing will
be different.

Print Overlay
=============
The alphabetical "Form Name" specified in the "Print Overlay" is
case sensitive.
Specify the correct case sensitive form name registered in the
printer.

As some applications paint the background in white to print, forms
with overlay may be hidden.  Such applications include Internet
Explorer and WordPad.

About searching for a printer by "Community Name"
=================================================
With the default setting of firewall on Windows Vista and Windows
Server 2008, you can't search for a printer across subnets by
"Broadcast". In this case, please specify the address directly
by selecting "Specify Address".

===================
Client Environment
===================

Multi-language Document
=======================
If a multi-language document is created using the multi-language
support function, you should select "Always Use TrueType Fonts" on
the "Fonts" dialog box before printing. When printing with printer
fonts, non-Japanese texts such as Greek, Croatian, etc. may be
printed incorrectly.

Notes on Windows 8 or later
=======================
* Annotation and Watermark may not be printed even if 
 [Header/Footer Options] and [Watermarks] are specified.
 To make them function, set [EMF Spooling] to [On] on the 
 [Detailed Settings] tab.

Blank Separators(1)
=======================
If you set EMF Spooling to [Enabled] or specify Header, Footer 
and Watermark, and perform 2-Sided Print with documents of odd number
of pages, a blank page may be inserted on the last page depending 
on application or OS.

Blank Separators(2)
=======================
If you set EMF Spooling to [Enabled] and perform 2-Sided Print with 
documents of odd number of pages, a blank page may be inserted 
on the last page depending on application or OS.


-------------------------
 3. Version Improvements
-------------------------
This section describes the modifications made for each upgraded
version.

[Improvements from Ver 2.6.1]
* Supported "Windows Vista".

[Improvements from Ver 2.6.2]
* Solved the problem that when creating Forms, abnormal end or hang-up
  of application may occur depending on folders to save the Forms in
  the situation where Internet Explorer in Protection mode is running
  on Windows Vista.
* Solved the problem that user details etc. may not be correctly
  reflected when outputting with [Prompt User for Settings] specified
  in the situation where Internet Explorer in Protection mode is running
  on Windows Vista.

[Improvements from Ver 2.6.3]
* Fixed the problem that the models of the print driver in the same product
  series may not be upgraded normally on Windows Vista.
* Fixed the problem that an alternative driver can not be installed
  on the print server with 32-bit OS.
* Improved the phenomena of print failure from a particular application. 
* Fixed the issue that documents containing a reversed image may not be
  output normally.
* Fixed the bug of a possible error when accessing the driver from an
  external tool.
* Fixed the issue that printing may not be performed normally through
  the application programs or services running on Local System Account.
* Fixed the issue that Printing Preferences specified by an application
  program may become invalid.
* Improved the situation where installation to Windows Vista may fail.

[Improvements from Ver 2.6.5]
* Windows 7 and Server2008 R2 has been supported.
* Fix the issue of TrueType Glyph problem
* Fix the problem to delete personal setting information at the time 
  of shared printer icon deletion.
* Fix the problem about an exception error in the addition printer.

[Improvements from Ver 2.6.6]
* Windows 8 has been supported.

[Improvements from Ver 2.6.7]
* Fixed the problem that behavior of print server sometimes become 
  unstable after repeating printer icon creation or setting change.

[Improvements from Ver 2.6.8]
* Fixed the problem that printer information of SimpleMonitor was not 
  updated depending on specific conditions.
* Fixed the problem that when printing from a certain multi-thread 
  application, the job sometimes remained in spooler.

[Improvements from Ver 2.6.9]
* Fixed the problems below, which might occur at printing pages including image
  data in the environment where Security Update Program released by Microsoft on
  August 9, 2017 (Security Update Program of August 2017) is applied.
    - Page is output as a blank page.
    - Output image is partly missing.
    - Unable to output because the size of spool data becomes too large.


=====================================================================
"Microsoft", "MS-DOS", "Windows", "Windows Server" "Windows Vista" 
are registered trademarks of Microsoft Corporation, U.S.A in the 
United States and other countries.
"Intel" and "Pentium" are registered trademarks of Intel
Corporation, U.S.A.
Other product names and companies' names are the registered
trademarks or trademarks of their respective owners.

Copyright (C) 2009-2018 Fuji Xerox Co., Ltd.  All rights reserved.
