======================================================
License Agreement for Fuji Xerox PCL 6 Printer Driver
======================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.
   
2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in your country.  You are
   not permitted to (1) assign, sublicense, sell, rent, lease, convey,
   or transfer the SOFTWARE to any third party by any tangible media
   such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the
   SOFTWARE on a network or by a telephone line available to the
   public or (3) alter, modify, decompile, disassemble, reverse
   engineer, or create derivative works based on the whole or any
   part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction. 
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS'
   BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
   FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
   YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER
   HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE.
   IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS,
   AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR
   ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR
   DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY
   MODIFICATION OF THE SOFTWARE.  
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any restrictions,
   laws or regulations imposed by the government of your country or
   any other relevant countries, and are required to obtain necessary
   approval prior to exporting the SOFTWARE.


=============================================================================
Additional Information:
FUJI XEROX DocuPrint C2120
Printer Driver Version 2.6.22.0 for
                    Microsoft(R) Windows(R) 2000,
                    Microsoft(R) Windows(R) XP, 
                    Microsoft(R) Windows Server(R) 2003,
                    Microsoft(R) Windows Vista(R),
                    Microsoft(R) Windows Server(R) 2008,
                    Microsoft(R) Windows(R) 7 and
                    Microsoft(R) Windows(R) 8.
=============================================================================
This document provides information about the printer driver on the
following items: 

  1. Requirements
  2. Installation
  3. Limitations
  4. Software Upgrade from the Earlier Version
  5. Software Update

 1. Requirements
=================
   * Please note that this printer driver operates on a PC/AT
     compatible processor with Intel(R) Pentium(R) II & above, 
     running on Microsoft(R) Windows(R) 2000, Windows(R) XP, 
     Windows Server(R) 2003, Windows Vista(R), Windows Server(R) 2008,
     Windows(R) 7,  Windows(R) 8.

 2. Installation
=================
Follow the instructions below to install PCL 6 printer drivers.

Important
----------
* Close all the running applications before installing the printer 
  driver.  
* Always reboot the computer after installing an upgraded version of 
  the printer driver.  
* If you have deleted an older version of the printer driver, always 
  reboot the computer before installing the new version.  
* The installation procedures are written with the assumption that
  standard settings have been configured in Windows.
  The procedures may differ if the start menu or folder options have
  been changed.  
* You may not be able to install correctly if installation is made 
  using Power User rights. Re-install as an Administrator.
* Installation may not be successful if this driver is not installed
  using the following procedure.
* Please refer to the following steps about deleting method under
  Windows Vista, Windows Server 2008, Windows 7 and Windows 8.
   * About driver deleting method (When using Windows Vista, 
     Windows Server 2008, Windows 7, or Windows 8)
* Please refer to the following section of this chapter for installation 
   method using plug-and-play under Windows 7 and Windows 8.
   * About driver installation method using plug-and-play 
     (When using Windows 7 or Windows 8)

To install printer drivers for Windows 2000
--------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Windows 2000, click the "Start" button.  Point to "Settings" and
     click "Printers".  
     Double-click the "Add Printer" icon.  
  2) Specify the printer connection.  
     * For a local printer:
       Select "Local printer".  
       Proceed to step 3).  
     * For a network printer:
       Select "Network printer" and click the "Browse" button.  
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
     If other printers are installed, a message asking whether to set
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
     Proceed to step 10).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name"
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
  7) Specify whether to share this printer with other network users.
  8) A dialog box specifying whether to print the test page after 
     installation is shown.
     To perform test printing on the print driver, load letter paper
     to the printer, select "Yes" and then "Next". 
     Select "No" and click "Next" if you do not wish to print the 
     test page.
  9) A dialog box to confirm the settings is displayed.  Click 
    "Finish" after confirming the settings.  
 10) A dialog box to confirm the continuation of installation is 
     displayed.  
     A message about the Electronic Signature cannot be found will 
     be displayed but this does not cause functional problem.  
     Click "Yes".  
 11) The necessary files are copied and a new printer icon is 
     created.  
     If you have printed the test page, a printer test result 
     confirmation message is displayed.  
     This completes the installation.  

     Next, we set the installed printer options.
 12) Double click the printer icon.
 13) From the "Printer" menu, click "Properties".
 14) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows XP/Windows Server 2003
--------------------------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Click the "Start" button.  Point to "Settings" and click 
     "Printers and Faxes".  
     If you are using Windows XP, click the "Add a printer" icon.  
     If you are using Windows Server 2003, Double-click the 
     "Add Printer" icon.
  2) Specify the printer connection.  
     * For a local printer:
       Select "Local printer attached to this computer".  
       Proceed to step 3).  
     * For a network printer:
       Select "A network printer, or a printer attached to another 
       computer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       If other printers are installed, a message asking whether to 
       set this as the default printer is shown.  
       Click "Yes" button if you want to set a printer as default.
     Proceed to step 10).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
  7) Specify whether to share this printer with other network users.  
  8) A dialog box specifying whether to print the test page after 
     installation is shown.
     To perform test printing on the print driver, load letter paper
     to the printer, select "Yes" and then "Next". 
     Select "No" and click "Next" if you do not wish to print the 
     test page.
  9) A dialog box to confirm the settings is displayed.  Click 
     "Finish" after confirming the settings.  
 10) A dialog box to confirm the continuation of installation is 
     displayed.  

     A message saying that it did not pass the Windows Logo Test will
     be displayed but this does not cause functional problem.
     Click "Continue Anyway".  

 11) The necessary files are copied and a new printer icon is 
     created.  
     If you have printed the test page, a printer test result 
     confirmation message is displayed.  
     This completes the installation.  

    Next, we set the installed printer options.
 12) Double click the printer icon.
 13) From the "Printer" menu, click "Properties".
 14) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows Vista,
Windows Server 2008, Windows 7,Windows 8
----------------------------------------------
  1) Double-click the downloaded compressed file (.exe format) to decompress.
  2) Activate the "Add Printer Wizard".
     2a) The following steps are available for use when installing printer
         under Windows Vista.
         * Click "Start" button and then click "Control Panel".
         * Select "Printers and Faxes" in "Hardware and Sound"
           and then select "Add a Printer".
     2b) On Windows Server 2008, select menu in the order below from
         the "Start" button.
         Go to "Start" > "Control Panel" > "Printers".
         Select "File" > "Run as Administrator" > "Add Printer" on the menu.
     2c) The following steps are available for use when installing
         printer under Windows 7.
         * Click "Start" button and then click "Devices and Printers".
         * Select "Add a printer" in "Devices and Printers".
     2d) The following steps are available for use when installing
         printer under Windows 8.
         * Go to "Control Panel" > "Hardware and Sound" >
           "Devices and Printers".
         * Select "Add a printer" in "Devices and Printers".
  3) Specify the printer connection.
     * For a local printer:
       Specify the local printer going through the menu displayed on Windows.
       Proceed to step 4).
     * For a network printer:
       Specify the desired printer from the network going through the menu
       displayed on Windows.
       Contact the network administrator if you have any queries.
       On Windows Vista and Windows Server 2008, if other printers are
       installed, a message asking whether to set this as the default printer is
       shown.
       Click "Yes" if you want to set it as a default printer.
       Proceed to step 8).
  4) Specify the printer port.
     Create a port if there is no output port.
  5) Click "Have Disk" from the "Add Printer Wizard" screen.
     An "Install From Disk" screen is displayed.
     Specify the directory containing the uncompressed files in step 1)
     in the "Copy manufacturer's files from" box.  Click "OK".
  6) A list of printers is displayed.  Select the desired printer.
     If the selected printer is already installed, a message asking
     whether to replace the existing driver is displayed.
     When installing a new version of the print driver, select
     "Replace existing driver" or "Replace the current driver".
     The older version of the driver cannot be deleted if it is used
     in an application.  In this case, close the application.
  7) A dialog box for specifying the printer name is displayed.
     To change the printer name, enter any name in the "Printer name" box.
     On Windows Vista and Windows Server 2008, if other printers are installed,
     a message asking whether to set this as the default printer is shown.
     * When using Windows Vista and Windows Server 2008 please check the "Set as
       the default printer" checkbox if you want to set a printer as default.
     Please proceed to step 10).
  8) A dialog box to confirm the continuation of installation may be displayed.
     If the dialog box is not displayed, go to the next step.
  9) The necessary files are copied and a new printer icon is
     created.
     If you have printed the test page, a printer test result
     confirmation message is displayed.
     By the above steps, the driver installation is completed.
     Please proceed to step 15).
 10) For Windows Vista, Windows Server 2008, Windows 7, and Windows 8,
     this is the start of the driver installation.
     * The installation confirmation screen published by Fuji Xerox Co., Ltd.
       may be displayed, but it is not a functional problem.
       Click "Install".
     * You can continue with the installation in the "User Account Control"
       dialog box.
       Click the "Continue" or the "Yes" button to proceed.
       For users without administrator rights who wish to install the driver,
       select the option of user with administrator rights,
       enter the password and then click "OK".
       "User Account Control" dialog is not displayed when the driver is
       installed through "Run as Administrator".
 11) Please ignore the pop-up dialogue of "Windows can't verify the publisher
     of this software" if it appears.  When you find the dialog, click
     "Install this driver software anyway." to continue with the installation.
     * A message "Windows can't verify the publisher of this driver software"
       appears depending on the version of Windows.
 12) Make sharing settings.
     If the driver is installed with administrator rights, a dialog to make
     sharing settings appears.  Make sharing settings in this dialog and
     click "Next".
 13) In the middle of installation, a message asking you to execute
     "fxzvup.exe" may be displayed.
     In such case, select "Allow" or "Run" and start the program.
 14) The driver installation is completed.
     On Windows 7 and Windows 8, if other printers are installed, a message
     asking whether to make this the default printer is shown.
     Confirm that "Set as the default printer" is selected.
     Click "Print a test page" button if you want to print a test page.

     Next, we set the installed printer options.
 15) Click the printer icon.
 16) From the "Printer" menu, click "Properties".
 17) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

About driver deletion method
(When using Windows Vista, Windows Server 2008, Windows 7, or Windows 8)
-------------------------------------------------------------------------
To remove drivers from system completely, please delete drivers and driver 
package going through the following steps.
Please note that driver package can not be deleted by executing driver 
uninstall tool.

  <<Windows Vista, Windows Server 2008>>
   * Click "Start" and open "Control Panel", then select "Printer" in
     "Hardware and Sound" panel.
   * Delete printer icon in "Printers" folder.
   * Right-click in "Printers" folder and select "Run as Administrator".
     Click "Server Properties" then "Printer Server Properties"
     window is displayed.
   * Select the driver to be deleted from the "Driver" tab and click
     "Remove" button.
   * Select "Remove driver and driver package.", then click "OK" button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and
     try to delete again.
   * Restart the computer.

  <<Windows 7, Windows 8>>
   <<Windows 7>>
   * Click "Start" and select "Devices and Printers".
   <<Windows 8>>
   * Go to "Control Panel" > "Hardware and Sound" and select "Devices and
     Printers".
   * Click the printer icon in the "Devices and Printers" folder,
     and select "Remove device" menu to delete it.
   * Click any of the Printer icons displayed in the "Devices and Printers"
     folder and select "Print server properties".
   * Click the "Drivers" tab to open it.
   * When the "Change Driver Settings" button is displayed, click it.
   * Select a driver to delete from the "Drivers" tab and click the "Remove"
     button.
   * Select "Remove driver and driver package" and click the "OK" button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and
     try to delete again.
   * Restart the computer.

About driver installation method using plug-and-play
(When using Windows 7 or Windows 8)
-----------------------------------------------------
When a driver is installed using plug-and-play, it may not be installed 
properly.  In such case, follow the steps below to reinstall the driver. 

   * Select "Devices and Printers". 
   * In the "Devices and Printers" folder, right-click the icon of this 
     printer and select "Properties".  
     *When the icon is disabled and inoperable, turn off/on the printer
      and make sure the printer is connected securely with a cable.  
   * Select this printer in "Device Functions" in the "Hardware" tab, and
     click the "Properties" button to open the Properties dialog. 
   * Click the "Change settings" button and open a new "Properties" dialog.  
   * In the new "Properties" dialog, open the "Drivers" tab, and click the 
     "Update driver" button to open the "Update driver software" dialog.  
   * Select "Browse my computer for driver software" and specify 
     the driver's location under "Search for driver software in this location:".
     Click "Next".
     *Please refer to the steps for driver installation using "Add Printer 
     Wizard" for how to prepare the driver.   
   * When a message stating that the driver has been updated successfully,  
      click "Close" to close the dialog.  
      Now, the driver has been reinstalled successfully.  

 3. Limitations
================

(1) When a printed pattern or diagram is different from what you see
    on the screen, changing the following settings may alleviate the
    problem.

    * Change the "Image Quality" setting on the "Image Options" tab.
    * Change the "Image Types" and the "Image Auto Correction" settings
      on the "Image Options" tab.
    * Set "High Speed Image Processing" on the "Advanced Settings"
      tab to "Off".
    * Set "Draw the pattern with fine lines as per the resolution"
      on the "Advanced Settings" tab to "On".
    * Change the "Resolution" setting in the "Other Settings
      (Graphics Settings)" on the "Advanced Settings" tab.
    * Change the "Halftone Print" setting in the "Other Settings
      (Graphics Settings)" on the "Advanced Settings" tab.

(2) The print layout may be changed when you change the "Image Quality"
    in the "Image Options" tab.

(3) Depending on the application, if the "Image Quality" is
    "High Quality" or the resolution of the driver is 600dpi,
    the size of the print data may become huge and 
    printing cannot be done properly. When this happens, specify the
    following settings:

    * Specify the "Image Quality" to "Standard" in the "Image Options"
      tab or "Resolution" in the "Other Settings (Graphics Settings)"
      in the "Advanced Settings" tab to "300dpi" or "200dpi".

(4) When doing a print job by specifying Paper Source as Auto, be
    sure to set Paper Size in the application to the Paper Size that
    the driver supports to enable the automatic paper feed feature.

(5) When using the Form Overlay feature, use form data of the same
    Paper Size, Resolution, and Image Settings as those of the
    document you want to print.  If these settings are different
    between form data and the page where the form data is incorporated,
    expected print results may not be obtained.

(6) With Booklet Creation, the "Page Number" item selected in the
    Header/Footer Options may not be printed properly. 

(7) When printing from the application running in the new UI environment 
    suitable for touch controls, which was introduced on Windows 8, if 
    [Black and White] is displayed as Output Color on the printing setting 
    screen, which is displayed after a printer is selected from the device 
    charm, the output will be in black and white even if the setting is 
    changed to [Color].
    To output in color, open [Devices and Printers] on Windows desktop, 
    right-click on the printer you use to select [Printing Preferences], 
    and in the [Default Setting] dialog, change [Output Color] on the 
    [Paper / Output] tab back to [Color].

(8) On Windows 8, Annotation and Watermark may not be printed even if 
    [Annotation] and [Watermark] are specified.
    To make them function, set [EMF Spooling] to [Available] on the 
    [Advanced Settings] tab.

 4. Software Upgrade from the Earlier Version
=============================================

2.6.22.0
--------
* Windows 8 is supported.

2.6.14.0
--------
* Windows 7 is supported.

2.6.11.0
--------
* Fixed the problem that the search for printer using SNMP community name
  fails.

2.6.10.0
--------
* Initial version

 5. Software Update
===================
    The latest software is available on our web site.

         http://www.fujixeroxprinters.com/

    Communication charges will be borne by the customer.


Portions of this software are based in part on the work of the
Independent JPEG Group.

Microsoft is the registered trademark of Microsoft Corporation.
Windows is the registered trademark of Microsoft Corporation.
Other names of products and companies are the trademarks or
registered trademarks of each company.
Copyright 2012 Fuji Xerox Co., Ltd. All rights reserved.
----------------------------< End of File >--------------------------
