======================================================
License Agreement for Fuji Xerox PCL 6 Printer Driver
======================================================

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and its
   third party suppliers.  You have no rights in the SOFTWARE except
   as expressly granted in accordance with this agreement.
   
2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products in your country.  You are
   not permitted to (1) assign, sublicense, sell, rent, lease, convey,
   or transfer the SOFTWARE to any third party by any tangible media
   such as floppy disk, magnetic tape, or CD-ROM, (2) distribute the
   SOFTWARE on a network or by a telephone line available to the
   public or (3) alter, modify, decompile, disassemble, reverse
   engineer, or create derivative works based on the whole or any
   part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified in this web site, you are required to follow
   such direction. 
   
3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.
   
4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN 'AS IS'
   BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR
   FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE.
   YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND MATCHING OTHER
   HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF THE SOFTWARE.
   IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL PARTNERS,
   AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE LIABLE FOR
   ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR CONSEQUENTIAL LOSS OR
   DAMAGE, ARISING FROM USE OF OR INABILITY TO USE SOFTWARE, OR ANY
   MODIFICATION OF THE SOFTWARE.  
   
5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any restrictions,
   laws or regulations imposed by the government of your country or
   any other relevant countries, and are required to obtain necessary
   approval prior to exporting the SOFTWARE.


=============================================================================
Additional Information:
FUJI XEROX DocuPrint C3290 FS
Printer Driver Version 2.6.12 for
                    Microsoft(R) Windows(R) 2000,
                    Microsoft(R) Windows(R) XP, 
                    Microsoft(R) Windows Server(R) 2003,
                    Microsoft(R) Windows Vista(R),
                    Microsoft(R) Windows Server(R) 2008 and
                    Microsoft(R) Windows(R) 7.
=============================================================================
This document provides information about the printer driver on the
following items: 

  1. Requirements
  2. Installation
  3. Software Upgrade from the Earlier Version
  4. Software Update
  5. Limitations

 1. Requirements
=================
   * Please note that this printer driver operates on a PC/AT
     compatible processor with Intel(R) Pentium(R) II & above, 
     running on Microsoft Windows 2000, Windows XP, 
     Windows Server 2003, Windows Vista, Windows Server 2008, or
     Windows 7.

 2. Installation
=================
Follow the instructions below to install PCL 6 printer drivers.

Important
----------
* Close all the running applications before installing the printer 
  driver.  
* Always reboot the computer after installing an upgraded version of 
  the printer driver.  
* If you have deleted an older version of the printer driver, always 
  reboot the computer before installing the new version.  
* The installation procedures are written with the assumption that
  standard settings have been configured in Windows.
  The procedures may differ if the start menu or folder options have
  been changed.  
* You may not be able to install correctly if installation is made 
  using Power User rights. Re-install as an Administrator.
* Installation may not be successful if this driver is not installed
  using the following procedure.
* Please refer to the following steps about deleting method under
  Windows Vista, Windows Server 2008 and Windows 7.
   * About driver deleting method (When using Windows Vista, 
     Windows Server 2008 or Windows 7)
* Please refer to the following section of this chapter for installation 
   method using plug-and-play under Windows 7.
   * About driver installation method using plug-and-play 
     (When using Windows 7)

To install printer drivers for Windows 2000
--------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Windows 2000, click the "Start" button.  Point to "Settings" and
     click "Printers".  
     Double-click the "Add Printer" icon.  
  2) Specify the printer connection.  
     * For a local printer:
       Select "Local printer".  
       Proceed to step 3).  
     * For a network printer:
       Select "Network printer" and click the "Browse" button.  
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
     If other printers are installed, a message asking whether to set
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
     Proceed to step 10).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name"
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
  7) Specify whether to share this printer with other network users.
  8) A dialog box specifying whether to print the test page after 
     installation is shown.
     To perform test printing on the print driver, load letter paper
     to the printer, select "Yes" and then "Next". 
     Select "No" and click "Next" if you do not wish to print the 
     test page.
  9) A dialog box to confirm the settings is displayed.  Click 
    "Finish" after confirming the settings.  
 10) A dialog box to confirm the continuation of installation is 
     displayed.  
     A message about the Electronic Signature cannot be found will 
     be displayed but this does not cause functional problem.  
     Click "Yes".  
 11) The necessary files are copied and a new printer icon is 
     created.  
     If you have printed the test page, a printer test result 
     confirmation message is displayed.  
     This completes the installation.  

     Next, we set the installed printer options.
 12) Double click the printer icon.
 13) From the "Printer" menu, click "Properties".
 14) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows XP/Windows Server 2003
--------------------------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Click the "Start" button.  Point to "Settings" and click 
     "Printers and Faxes".  
     If you are using Windows XP, click the "Add a printer" icon.  
     If you are using Windows Server 2003, Double-click the 
     "Add Printer" icon.
  2) Specify the printer connection.  
     * For a local printer:
       Select "Local printer attached to this computer".  
       Proceed to step 3).  
     * For a network printer:
       Select "A network printer, or a printer attached to another 
       computer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       If other printers are installed, a message asking whether to 
       set this as the default printer is shown.  
       Click "Yes" button if you want to set a printer as default.
     Proceed to step 10).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     Click "Yes" button if you want to set a printer as default.
  7) Specify whether to share this printer with other network users.  
  8) A dialog box specifying whether to print the test page after 
     installation is shown.
     To perform test printing on the print driver, load letter paper
     to the printer, select "Yes" and then "Next". 
     Select "No" and click "Next" if you do not wish to print the 
     test page.
  9) A dialog box to confirm the settings is displayed.  Click 
     "Finish" after confirming the settings.  
 10) A dialog box to confirm the continuation of installation is 
     displayed.  

     A message saying that it did not pass the Windows Logo Test will
     be displayed but this does not cause functional problem.
     Click "Continue Anyway".  

 11) The necessary files are copied and a new printer icon is 
     created.  
     If you have printed the test page, a printer test result 
     confirmation message is displayed.  
     This completes the installation.  

    Next, we set the installed printer options.
 12) Double click the printer icon.
 13) From the "Printer" menu, click "Properties".
 14) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows Vista/Windows Server 2008
-----------------------------------------------------------------
  1) Activate the "Add Printer Wizard".  
     Click "Start" button and click "Control Panel".
     Select "Printer" in "Hardware and Sound" then select 
     "Add a Printer".
     <Caution> If you are using Windows Server 2008, right-click in
     "Printers" folder and select "Add Printer" in 
     "Run as administrator".
  2) Specify the printer connection.
     * For a local printer:
       Click "Add a local printer."
       Proceed to step 3).  
     * For a network printer:
       Click "Add a network Wireless or Bluetooth printer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       Proceed to step 9).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
     Note:When a network folder is specified, it may result in an 
          error.  Therefore, copy the driver to install to a local 
          folder in advance and specify it.  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     You can set the printer as the default printer by checking the 
     check box displayed under "Printer Name". 
  7) You can continue with the installation in the "User Account  
     Control" dialog box. Click the "Continue" button to proceed.
     For users without administrator rights who wish to install the 
     driver, select the option of user with administrator rights, 
     enter the password and then click "OK". 

     Please ignore the pop-up dialogue of "Windows can't verify the
     publisher of this software". Click "Install this driver software
     anyway." to continue with the installation.

  8) When the driver is installed through "Run as Administrator", the
     dialogs for common settings are displayed.  
     Specify common settings in the dialogs and click "Next".
  9) The driver installation is completed.
     To perform test printing on the print driver, load letter paper
     to the printer and click "Print a test page" button. 

     Next, we set the installed printer options.
 10) Double click the printer icon.
 11) From the "Printer" menu, click "Properties".
 12) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

To install printer drivers for Windows 7
-----------------------------------------

  1) Activate the "Add Printer Wizard".  
     Click "Start" button and click "Devices and Printers".
     Select "Add a Printer".
  2) Specify the printer connection.
     * For a local printer:
       Click "Add a local printer."
       Proceed to step 3).  
     * For a network printer:
       Click "Add a network Wireless or Bluetooth printer".
       Specify the desired printer from the network.
       Contact the network administrator if you have any queries.
       Proceed to step 9).  
  3) Specify the port to be used for the printer.  
     Create a port if there is no output port.
  4) Click "Have Disk" from the "Add Printer Wizard" screen.  
     An "Install From Disk" screen is displayed.  
     Specify the directory containing the printer driver files in the
     "Copy manufacturer's files from" box.  Click "OK".
     Note:When a network folder is specified, it may result in an 
          error.  Therefore, copy the driver to install to a local 
          folder in advance and specify it.  
  5) A list of printers is displayed.  Select the desired printer.  
     If the selected printer is already installed, a message asking 
     whether to replace the existing driver is displayed.  
     When installing a new version of the printer driver, select 
     "Replace existing driver".  The older version of the driver 
     cannot be deleted if it is used in an application.  In this 
     case, close the application.  
  6) A dialog box for specifying the printer name is displayed.  
     To change the printer name, enter any name in the "Printer name" 
     box.  
     If other printers are installed, a message asking whether to set 
     this as the default printer is shown.  
     You can set the printer as the default printer by checking the 
     check box displayed under "Printer Name". 
  7) You can continue with the installation in the "User Account  
     Control" dialog box. Click the "Continue" button to proceed.
     For users without administrator rights who wish to install the 
     driver, select the option of user with administrator rights, 
     enter the password and then click "OK". 

     Please ignore the pop-up dialogue of "Windows can't verify the
     publisher of this software". Click "Install this driver software
     anyway." to continue with the installation.

  8) When the driver is installed through "Run as Administrator", the
     dialogs for common settings are displayed.  
     Specify common settings in the dialogs and click "Next".
  9) The driver installation is completed.
     To perform test printing on the print driver, load letter paper
     to the printer and click "Print a test page" button. 

     Next, we set the installed printer options.
 10) Double click the printer icon.
 11) From the "Printer" menu, click "Properties".
 12) Click the "Options" tab.
     Perform the setting when the "Options" tab is displayed.

About driver deleting method 
(When using Windows Vista, Windows Server 2008 or Windows 7)
-------------------------------------------------------------
To remove drivers from system under Windows Vista, Windows Server 2008, 
or Windows 7 completely, please delete drivers and driver package 
according to the following steps.

  <<Windows Vista, Windows Server 2008>>
   * Click "Start" and open "Control Panel", then select "Printer" in
     "Hardware and Sound" panel.
   * Delete printer icon in "Printers" folder.
   * Right-click in "Printers" folder and select "Run as 
     Administrator".
     Click "Server Properties" then "Printer Server Properties" 
     window is displayed.
   * Select the driver to be deleted from the "Drivers" tab and click 
     "Remove" button.
   * Select "Remove driver and driver package.", then click "OK" 
     button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and 
     try to delete again.   
   * Restart the computer.

  <<Windows 7>>
  * Click "Start" and select "Devices and Printers".  
  * Click the printer icon in the "Devices and Printers" folder, 
    and select "Remove device" menu to delete it.   
  * Click any of the icons displayed in "Printers and Faxes" in the
    "Devices and Printers" folder and select "Print server properties".  
  * Click the "Drivers" tab to open it.  
  * When the "Change Driver Settings" button is displayed, click it.  
  * Select a driver to delete from the "Drivers" tab and click the "Remove" 
    button.  
  * Select "Remove driver and driver package" and click the "OK" button.  
  * When the driver is in use, a message appears and the driver package
    may not be able to be deleted.  In such case, reboot the computer and 
    try to delete again.   
  * Restart the computer.

About driver installation method using plug-and-play
(When using Windows 7)
-----------------------------------------------------
When a driver is installed using plug-and-play under Windows 7, it may not
be installed properly.  In such case, follow the steps below to reinstall 
the driver. 

  * Click "Start" and select "Devices and Printers". 
  * In the "Devices and Printers" folder, right-click the icon of this 
    printer and select "Properties".  
    *When the icon is disabled and inoperable, turn off/on the printer
     and make sure the printer is connected securely with a cable.  
  * Select this printer in "Device Functions" in the "Hardware" tab, and
    click the "Properties" button to open the Properties dialog. 
  * Click the "Change settings" button and open a new "Properties" dialog.  
  * In the new "Properties" dialog, open the "Drivers" tab, and click the 
    "Update driver" button to open the "Update driver software" dialog.  
  * Select "Browse my computer for driver software" and specify 
    the driver's location under "Search for driver software in this location:".
    Click "Next".
    *Please refer to the steps for driver installation using "Add Printer 
    Wizard" for how to prepare the driver.   
  * When a message stating that the driver has been updated successfully,  
     click "Close" to close the dialog.  
     Now, the driver has been reinstalled successfully.  

3. Software Upgrade from the Earlier Version
=============================================
 [Version 2.6.12]
* Supported of Windows 7.

4. Software Update
===================
    The latest software is available on our web site.

         http://www.fxprinters.com/
 
   Communication charges will be borne by the customer.

Portions of this software are based in part on the work of the
Independent JPEG Group.

=====================================================================
"Microsoft", "Windows", "Windows Vista" and  "Windows Server" are 
registered trademarks of Microsoft Corporation in the United States 
and other countries.
Other product names and company names stated herein are registered 
trademarks or trademarks of the respective companies.

Copyright (C) 2010 Fuji Xerox Co., Ltd.  All rights reserved.
