===============================================================================
License Agreement
===============================================================================

The license agreement for this software (hereinafter referred to as the
SOFTWARE) is described as follows.

1. Intellectual property rights in the SOFTWARE shall remain in Fuji Xerox Co.,
   Ltd. (hereinafter referred to as Fuji Xerox) as well as the original
   copyright holders.

2. The SOFTWARE can only be used with compatible Fuji Xerox products
   (hereinafter referred to as the COMPATIBLE PRODUCTS) within the country of
   purchase of the COMPATIBLE PRODUCTS.

3. You are required to abide by the notes and restrictions (hereinafter referred
   to as the NOTES AND RESTRICTIONS) declared by Fuji Xerox while using the
   SOFTWARE.

4. You are not permitted to alter, modify, reverse engineer, decompile or
   disassemble the whole or any part of the SOFTWARE for the purpose of
   analyzing the SOFTWARE.

5. You are not permitted to distribute the SOFTWARE on a communication network,
   or transfer, sell, rent or license the SOFTWARE to any third party by
   duplicating the SOFTWARE on any media such as floppy disk or magnetic tape.

6. Fuji Xerox, Fuji Xerox Channel Partners, Authorized Dealers and the original
   copyright holders of the SOFTWARE shall not be liable for any loss or damage
   arising from matching of hardware or program that are not specified in the
   NOTES AND RESTRICTIONS of the SOFTWARE, or any modification to the SOFTWARE.

7. Fuji Xerox, Fuji Xerox Channel Partners, Authorized Dealers and the original
   copyright holders of the SOFTWARE shall not be responsible for any warranty
   or liability with respect to the SOFTWARE.

===============================================================================
PostScript language compatibility Driver + Additional Feature Plug-in + PPD File
Ver.6.7.0 Additional Information
===============================================================================

This document provides information about the driver on the
following items:

1. Target Hardware Products
2. Requirements
3. Cautions and Limitations
4. Inquiries

---------------------------------------------------
1. Target Hardware Products
---------------------------------------------------
FUJI XEROX DocuPrint CP315/318 st

---------------------------------------------------
2. Requirements
---------------------------------------------------
Please note that this driver operates on a computer running on the following
operating system.

  Microsoft(R) Windows Server(R) 2012
  Microsoft(R) Windows(R) 8.1 x64 Editions
  Microsoft(R) Windows Server(R) 2012 R2
  Microsoft(R) Windows(R) 10 x64 Editions
  Microsoft(R) Windows Server(R) 2016
  Microsoft(R) Windows Server(R) 2019

  Please visit our web site to check the latest software and supported
  operating systems.

---------------------------------------------------
3. Cautions and Limitations
---------------------------------------------------
* Limitations to Collate Printing
- When [RAM Disk] is set to [Not Installed] in [Installable Options] of the
  printer driver, collate printing is not available even though the RAM Disk is
  installed actually. When the RAM Disk is installed to the printer, set [RAM
  Disk] to [Installed] in [Installable Options].

* Notes on Windows 7 or later versions
- Driver installation method by Plug & Play
  Driver installation by Plug & Play may not complete properly.
  In such case, install the driver again following the process below.
  - Select [Devices and Printers].
  - Right-click on the icon of this printer in the [Devices and Printers] folder
    and click [Properties].
    - The icon may be uncontrollable with grayout. Turn on the power of printer
      again and be sure that the printer is connected by cable.
  - In a condition of keeping this printer selected in [Device Functions] on
    the [Hard ware] tab, click the [Properties] button and open the Property
    dialog.
  - Click the [Change Settings] button and open new [Properties] dialog.
  - Open the [Driver] tab in the new [Properties] dialog, click the [Update
     Driver] button and open the [Update Driver Software] dialog.
  - Select [Browse my computer for driver software] and specify the driver
    location by [Search for driver software in this location], Click the
    [Next] button.
  - A message indicating that the driver has been updated will be displayed.
    Close the dialog by clicking the [Close] button.
    This is the end of the reinstallation.

* Notes and limitations about the server-client environment
- Server-Client Environment Issue (1)
  If the printer is being used as a shared printer and the server's operating
  system is being upgraded, a message indicating that the driver has to be
  updated may appear on the client, causing printing to fail.
  In this case, the print driver has to be reinstall on the client to be able
  to print again.

- Server-Client Environment Issue (2)
  In the Server-Client environment, after a print driver is added or upgraded
  on the Server side, printing may not be performed with a displayed message
  requiring print driver upgrade on the Client side.
  This problem can be avoided by the settings below.

  < Change of Group Policy Settings on Client PC >
  1. Log on as an Administrator on Client PC.
  2. Open command prompt and execute "gpedit.msc". to open [Local Group Policy
     Editor].
  3. Open the tree on the left side in the following order.
     [User Configuration]
     [Administrative Templates]
     [Control Panel]
     [Printers]
  4. Double-click [Point and Print Restrictions] in the right pane.
  5. Click the [Disabled] radio button.
     ([Disabled] radio button is on [Settings] tab in Windows Vista.)
  6. Click [OK] to close the window.
  7. Close [Local Group Policy Editor].

* Limitations on shared printer
  When the driver is shared over the network and the driver, with different
  architecture, is specified and installed as an additional driver, a dialog
  box requesting for the specified architecture media will appear.
  Even if you have made an entry in the dialog box, it will keep on appearing,
  causing the installation to fail.
  For example, this will happen when installing x64 driver on x86 operating
  system.

* Limitation on printer search function
  Even when [Broadcast] is used to search for printer in the [Printer Search]
  dialog box, which appears when [Get Information from Printer] or [Status] is
  selected, printer search may fail. When this happened, select [Specify
  Address] to implement the printer search may resolve this problem.

* Limitations for combination use of [Print in Reverse Order] and other features
  The following features cannot be used if [Print in Reverse Order] is specified.
  - Specify Job Owner Name
  - Secure Print / Sample Set
  - Document Monitor
  - Banner Sheet
  If the above-mentioned features were specified concurrently with [Print in
  Reverse Order], secure print may malfunction, causing the print job to be
  printed as normal job.

* For shared printers
  If the client of the shared printer is using an operating system not supported
  by this driver, an alternative driver for the respective operating system is
  required. Please ensure that the alternative driver has the same driver
  version as this driver. If the versions are different, the alternative driver
  may not be able to install.

* Notes on using Image Rotation 180 Degrees
  When margins are set up on the server properties and [Image Rotation 180
  Degrees] is specified, print position may not be printed correctly.

* Limitations on user-defined size
  When user-defined size is used and the displayed width and height are set to
  the minimum (or maximum) value, the print job may not be printed properly.
  In this case, please change the value to a larger (or smaller) value to print.

* Limitation on the setting range
  The range of user-defined sizes that can be used by the PostScript language
  compatibility driver vary depending on the device model.  Paper sizes that
  exceed the limit of the user-defined size (there may be slight deviation
  due to unit conversion) may not be printed properly.

* Notes on paper sizes
  When applications that enable paper specification, such as Microsoft Word,
  are used, please ensure that the same paper size is specified on the
  application and the driver.

* Limitations concerning 2-Sided Printing
  If you are printing documents with odd-number of pages, a blank page may be
  added to the last page depending on the settings of the operating system
  (referred to as "OS" hereinafter).
  Summon the Properties dialog box from the printer icon and deselect the
  [Enable advanced printing features] in the [Advanced] tab.
  This will prevent the printer from adding blank paper to the printout.
  However, please take note that once this check box is unchecked, Reverse
  Printing will become unavailable. In addition, some application software will
  automatically insert blank sheet for page adjustment according to the
  condition for specifying print quantities.
  As this behavior is a specification of the application software, it is not
  possible to configure this driver or the device to prevent blank sheet from
  being inserted to the printout. The target device will print the data as it
  is received after it is edited and printed from the client's side according
  to the operating system or application software specification.
  If the document data to be printed consist of blank-sheet data inserted by
  the operating system or application software, this blank sheet will be
  counted as part of the print data.

* Blank Separators
  If you set [EMF Spooling] to [Enabled] and perform [2-Sided Print] with documents
  of odd number of pages, a blank page may be inserted on the last page depending
  on application or OS.

* Limitation on Printing Black and White Documents with Color Model Printer
  Depending on the operating system and the application program,
  a black-and-white document may be processed as color data and output in
  process black (using all CMYK colors) when it appears in Black and White on
  screen.
  If you need to print a document in white mode properly, make sure to set
  [Output Color] to [White].

* Co-existing with the MSPScript driver bundled with the operating system
  When both FX Plug-in driver and MSPScript driver bundled with the operating
  system were used to install printer of the same model, the driver installed
  most recently will overwrite the previously installed driver, even if the
  printer icon name is different.
  If you have accidentally installed a MSPScript driver bundled with the
  operating system, please install the FX Plug-in driver again.

* Limitation on PS Output Options (1)
  When [EPS (Encapsulated PS)] is selected under PS Output Options, print
  settings such as paper tray, output method, copies may become invalid.
  Please do not use this for printing.

* Limitation on PS Output Options (2)
  When [Archive Format] is selected for PS Output Options, the print job  may
  not be printed properly. Please use it to print to file only.

* Limitation on the font used
  Problem with garbled characters may occur depending on your application and
  font used.
  In this case, change the setting for [TrueType Font Download Options] to
  [Outline] or [Bitmap] may solve the problem.

* Limitations on remote installation
  When remote installation is executed, driver installation may not end properly.

* LPR connection
  In [Add Standard TCP/IP Printer Port Wizard], when the dialog box showing
  [Additional Port Information Required] is displayed, please select
  a corresponding printer for [Standard] in [Device Type].

* Notes on Standard TCP/IP Port
  When document fails to print in some applications, select [LPR Byte Counting
  Enabled] check box in [Configure Standard TCP/IP Port Monitor] may solve the
  problem.

* Notes and limitations on certain applications
- Limitations on Adobe Acrobat 8.1
  When [Secure Print] and [Sample Set] is selected, the document name may not
  display properly in the device panel.

- Limitations in Adobe Acrobat(1)
  When [Image Rotation 180 Degrees] is used, image may not be printed properly.
  In this case, please select the [Print as image] check box in Acrobat's
  [Print] dialog box.

- Limitations in Adobe Acrobat(2)
  When [Choose Paper Source by PDF page size] is selected in the [Print] dialog
  box, 2-sided printing may not be executed properly.
  In this case, uncheck [Choose Paper Source by PDF page size] or select
  [Print as image] in the [Print] dialog.

- Limitations in Adobe Acrobat(3)
  [Mirror Image] functions may not be executed properly.
  In this case, please select the [Print as image] check box in Acrobat's
  [Print] dialog box.

- Limitations in Adobe Acrobat(4)
  When [Advanced] > [Choose Output Tray by PDF Page Size] is selected in the
  [Print] dialog box, printing may not be executed properly.
  In this case, disable this function.

- Limitations in CorelDRAW
  When printing in CorelDRAW, the printout may be rotated 90 degrees.
  In this case, select [Use PPD] check box in the [General] tab in CorelDRAW's
  Print dialog box, and specify the PPD file for the device model used.
  Please download the PPD file designated here from our website.

  However, the above-mentioned method may caused some features, such as [Secure
  Print] and [Sample Set] to be unavailable for use.

- Limitations in Microsoft Excel
  Features such as [Pages per sheet (N-Up)] may not function properly in
  Microsoft Excel. In this case, changing the paper size setting in Microsoft
  Excel to a different name with the same size may solve this problem.
  For example, changing [Letter] to [8.5x11"] or [Legal] to [8.5x14"].

- Limitations on Microsoft Internet Explorer
  The following functions are restricted with use of Internet Explorer in
  Protected Mode.
  - The setting items for [Job Type] ([Secure Print] / [Sample Set]) can not be
    edited.
  - The functions of [Saved Settings], [Save] and [Edit] are disabled.
  - The functions of [Watermark], [New], [Edit] and [Delete] are disabled.
  To change the settings of these functions, open the default setting of the
  document from the Printer Folder.

- Limitations in Microsoft PowerPoint
  The surrounding area of a GIF image may not be printed as transparent.

- Limitations in Microsoft Word(1)
  When printing odd-numbered pages from Microsoft Office Word 2007 using
  2-Sided Print feature, the application may automatically insert blank pages
  for page adjustment. In this case, the blank inserts inserted by the
  application will be counted.
  For printer models that provide [Skip Blank Page] function in the driver's
  printer properties setup screen, enabled [Skip Blank Page] function in the
  [Advanced Settings] tab in the device's [Printing Preferences] dialog box.

- Limitations in Microsoft Word(2)
  Image and text that are semi-transparent may not be printed properly in
  Microsoft Word.

- Limitations in Microsoft Word(3)
  To print with collation using MSPScript 5 driver on Microsoft Word, ensure
  that the [Collate] check box in the Print dialog of Microsoft Word is ON.

- Limitations in Microsoft Word(4)
  Settings in [Page Setup] > [Paper] > [Other pages] may not be valid.

- Limitations in Microsoft Word(5)
  Multiple Up printing may not be available on Microsoft Word 2002.

- Limitations in Microsoft Word(6)
  To print using Custom Paper Size on Microsoft Word, go to [Server Properties],
  check [Create a new form] and specify paper size for paper registration.
  You can select a registered paper size from [Page Settings] of the
  application software.

- Limitations on Fuji Xerox DocuWorks Viewer Light
  The paper size specified on the driver will not be reflected, instead
  DocuWorks document paper size will be used.

---------------------------------------------------
4. Inquiries
---------------------------------------------------
    The latest software is available on our web site.

        https://www.fujixerox.com/

    Communication charges will be borne by the customer.

-------------------------------------------------------------------------------
Adobe and Acrobat are either registered trademarks or trademarks of
Adobe in the United States and/or other countries.

Microsoft, Windows, Windows Server, Word, Excel, PowerPoint and Internet Explorer
are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.

DocuWorks is a registered trademark of Fuji Xerox Co., Ltd.

Other company names and product names are trademarks or registered
trademarks of the respective companies.

(C) Fuji Xerox Co., Ltd. 2020
