PCL Printer Driver
For Microsoft Windows
2000/XP/Server2003/Vista/Server2008/7
(x86/x64)
[Ver.1.2.0.0]

SOFTWARE LICENSE AGREEMENT
YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO THE TERMS OF THIS AGREEMENT.
BY LOADING THE SOFTWARE INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT LOAD THIS SOFTWARE INTO ANY COMPUTER.
Grant of License
The Software is licensed for use by you for the equipment packaged with the Software or designated by its supplier ("the equipment"). You are permitted to use the Software on any computer which permits electronic access to the equipment. You are not permitted to rent or lease the Software or to transfer your rights under this license to a third party.
Acceptance
You shall be deemed to have accepted the terms of this Agreement by loading the Software into any computer.
Duration
This license is effective until terminated. The license will terminate where you fail to comply with the terms of this Agreement. Upon termination, you agree to destroy all copies of the Software and its documentation.
Ownership of Software
You own, if any, only the magnetic media on which the Software has been delivered. It is an express condition of this Agreement that the title and ownership of the Software shall be retained by its owners.
Copying
The Software and its documentation are the subject of Copyright.
You may not make any copies nor cause others to make copies of the Software except such copies as are necessary for licensed use and one copy for operational security. Any such copies are subject to the conditions of this Agreement.
You may not modify, adapt, merge, translate, reverse engineer, decompile, disassemble or create derivative works based on the whole or any part of the Software or its associated documentation.
You may be held legally responsible for any copyright infringement, unauthorized transfer, reproduction or use of the Software or its documentation.
Limitation of Warranty
The media, if any, not the Software contained therein, is warranted to the original purchaser against defects in material and workmanship for a period of one year from the date of original purchase. Defective media will be replaced when it is returned to your supplier, postage prepaid, along with a copy of the purchase receipt.
THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, CONTRACT, OR OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE SOFTWARE OR ITS LICENSORS BE LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS, SAVINGS OR BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES) ARISING OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE INABILITY TO USE THE SOFTWARE.
Exporting Law
You acknowledge that the export of the Software is governed by the export control laws of the United States and other countries. You agree to comply with all such export control laws.
Governing Law and Jurisdiction
If any provision or portion of this Agreement shall be found to be illegal, invalid or unenforceable, the remaining provisions shall remain in full force and effect. This Agreement shall be governed by the laws of California, USA and is subject to the jurisdiction of the Federal District courts for the Central District of California by a judge and not a jury.

#### INTRODUCTION

This file describes how to set up your printer driver and contains the most up-to-date information that was available at the time of software release. Please see [2] Limitation/Notes in using PCL printer driver section for details of known limitations. For information on printer driver settings and features, please check the Help file.
Please make sure to read this before installing PCL printer driver.

#### CONTENTS

[1] How to install PCL printer driver
(1) Installing PCL printer driver at the first time.
(2) Upgrading the printer driver
(3) Uninstalling the printer driver
(4) Notes for the installation
[2] Limitation/Notes in using PCL printer driver

#### [1] How to install PCL Printer Driver

(1) Installing PCL printer driver at the first time.
* Make sure to close all applications before installing.

- 1 | Start Windows and log on as Administrators or Power Users. When using a driver downloaded from the Internet: After downloading the driver from the Internet, extract the file(s) to a folder of your choice. From the [Start] menu, point to [Settings], then click [Printers] or [Printers and Faxes]. In the Printer folder double click [Add Printer] (it may be in [Printer Tasks]), and click "Next >".
- 2 | Follow the Wizard guidance and select a printer connection method (My Computer or Network Printer Server / Local or Network Printer), then click "Next >" to continue.
- 3 | The following explanation applies when the user has selected a [Local] connection method. A) To install the downloaded driver, click [Have Disk] then [Browse] to locate the folder where you had extracted the downloaded driver, from this folder select Disk 1, then click "OK". B) Insert the CD-ROM into the CD ROM Drive, [Have Disk] button in "Manufacturers:" / "Printers:" window, then enter the path (e.g. D:\DRIVERS\PCL{5,6}\(language)\WIN2K_XP\DISK1\) of the designated Drive then click "OK". (You can also navigate to the Drive by clicking the [Browse] button).
- 4 | Select the printer to use. After selecting, click "Next >".
- 5 | Specify printer name. And if you want to use installed printer as the default printer, check "Yes". After specifying, click "Next >".
- 6 | If you want to share installed printer with other network users, indicate and set sharing. After above, click "Next >".
- 7 | Print test page to confirm that the printer is set up properly. Check on "Yes(recommended)" , then click "Finish", and finally , the installation is completed.

After completing above operation, you can use PCL printer driver for Windows2000/XP/Server2003/Vista/Server2008/7.
(2)Upgrading the PCL Printer Driver
Please follow these installation steps to update the printer driver from old version to new version;

- 1 | Uninstall the PCL printer driver with the same step as "(3) Uninstalling PCL Printer driver".
- 2 | Install new version of the PCL printer driver with the same step as "(1) Installing PCL Printer driver at the first time."

After completing above operation, you can use PCL printer driver of new version.
(3) Uninstalling PCL printer driver.
* Make sure to close all applications before uninstalling.

- 1 | Open [Printers] or [Printers and Faxes] or folder in [Settings] from [Start] menu.
- 2 | Select the printer you want to uninstall.
- 3 | Press [Delete] key.
- 4 | Select "Driver" Tab in Server Property from File Menu in Printer Folder.
- 5 | Select the driver you want to uninstall.
- 6 | Press [Delete] key.

(4)Notes for the installation

* | With PCL printer driver, the drivers of different versions can't be used together.
* | If "Print Settings" screen doesn't look normal after installation, delete the driver with the procedure of above (2) and reinstall the driver.
* | Do not extract CD-ROM before the installation is finished. Or else, system error might occur.
* | Bi-directional network communication may requires SmartDeviceMonitor for Client. It is up to the printer you use.
* | SmartDeviceMonitor for Client cannot be run on Windows x64. Therefore, bi-directional network communication is only available with the 32-bit driver(It is up to the printer you use).
* | Remote Install is not available.
* | During the driver installation, Windows may suggest to keep the newer module already installed in Windows. Please select "Yes" to use the newer module.

#### [2] Limitation/Notes in using PCL printer driver

The settings which are introduced below are depending on the printer or the printer driver you use.

[In General]
* | To avoid problems in general, make sure that there is plenty of free disk space.
* | With some applications (e.g. CorelDRAW, Visio), complicated images may take a long time to print when the "Graphic Mode" is "Vector". For faster printing, choose "Raster"(Graphics Mode) and/or "Print as graphics"(TrueType Mode) on the "Print Quality" tab.
* | If the printer driver language differs from that of the Operating System, characters may not be printed properly or the characters on the printer driver may not be displayed properly.

[OS/Windows Related Issues]
* | Jobs should not be submitted to the queue while the Windows Print Spooler is not running.
* | In some cases, Separator pages might result in anomalies.
* | Please do not change the "Driver" setting on the "General" or "Advanced" tab.

[With Driver Settings]
* | [Copies] in [Setup] Tab: When "Copies" is selected on the driver's "Setup" tab, the value may not be reflected in the application print dialog box. Be sure to set the number of copies only in the driver, not in the application.
* | [Duplex] in [Setup] Tab: Documents may not be stapled at the slant angle, even when you select "Top Left Slant" or "Top Right Slant". In such a case, the document will be stapled parallel to an edge of the paper.
* | [Custom Paper Size] in [Paper] Tab: The measurement unit in the Custom Paper Size dialog is reset to "cm" when the driver dialog is reopened, even if the custom paper size was previously specified in "inch". The paper size specification is retained regardless of the unit.
* | [Watermark] Tab: The watermark is not printed on the first page when both "On first page only" and "Booklet" are selected. If the "Graphics Mode" is set to "Raster" or if the "TrueType Mode" is set to "Download as bit image", the watermark may not print correctly. Change the "Graphics Mode" to "Vector".
* | [Booklet/Duplex] in [Setup] Tab: Printing a large document in booklet produce a large temporary file. If you encounter an error when printing a large document in booklet, try again after increasing the free area in drive C:.
* | [Post Processing] in [Advanced] Tab: If the "Post Processing" is set to "OFF", the watermark as "Transparency" may not print correctly. In order to avoid this problem, please change the "Post Processing" to "ON".
* | [Edge to Edge Print] and [Non Reduction Booklet] in [Setup] Tab: The use of "Edge to Edge Print" with "Non Reduction Booklet" might result in anomalies.
* | [Covers] in [Paper] Tab: Use of a different Paper Source for the cover setting might result in a paper mismatch error. This occurs if the cover is of a different paper size than the rest of the document. This only happens if the cover is not blank and if the source tray for the rest of the document is not "Auto Tray Select". As a workaround, change the print settings so that any one of the above conditions are not met. Note: "cover" = Front Cover, Back Cover or Chaptering Pages

[Graphics/Images]
* | When graphics images or text printed as graphics images are not printed as they appear on your computer screen, change the "Graphics Mode" on the "Print Quality" tab.
* | Selecting the Spool Type as EMF may cause some applications not to print well in "Vector" mode. If this happens, return the Spool Type setting to RAW.

[Fonts/Texts]
* | With Adobe Type Manager(ATM), some characters may not print correctly. To avoid this problem, change the "Graphic Mode" to "Raster" or print the document with PCL 6 or PostScript driver.
* | With some applications, some characters may not print correctly. To solve this problem, change the "TrueType Mode" and/or the "Use Printer Fonts" on the "Print Quality" tab.
* | Documents that contain fonts that are not installed on your computer might not print correctly.
* | Some TrueType fonts such as Kidnap may not print correctly on Windows 2000. In order to avoid this problem, "TrueType Mode" to "Download as Bit Image" or "Print as Graphics" in the "Print Quality" tab.
* | The watermark as "Outline only" may not print if the watermark message contains Chinese characters. To avoid this problem, use the PCL 6 driver.
* | Additional lines may appear when the bold HANYI fonts larger than 36 points are printed.
* | The HANYI fonts can not be printed in 300 dpi. To avoid this problem, print it in 600 dpi.
* | Some Chinese fonts such as HUA WEN CAI and HUA WEN XING KAI may not print appropriately. To avoid this problem, please set Graphics Mode to "Raster" and TrueType Mode to "Print as graphics" in the Print Quality tab.
* | To print watermark text in Chinese, choose a Chinese font.

[Connection/Port related Issues]
* | When printing complicated documents to a printer connected with a parallel interface, the printer time-out may cause the document to print incorrectly. If this happens, the Spool Setting to "Start printing after last page is spooled" and/or extend the IO timeout at the printer operation panel(max. 300 seconds).
* | When the printer is connected with a SMB port, "Update Now" in the Accessories tab doesn't work. Please manually configure the accessories.

[CMYK used for Black and White Documents]
* | Black and White documents might be printed in full color (CMYK). To ensure that the job prints using pure Black (K), please change the color mode to "Black and White" or "Monochrome".
* | When selecting "Color" from "Color/ Black and White" setting in the "Setup" Tab, black and white document may be printed as a color job, depending on application or data. If you want to print a document in black and white, select "Black and White" in "Color/ Black and White" setting.

[Help]
* | Windows Vista does not support the help format used in previous versions of Windows. Please download the legacy help application WinHlp32.exe from Microsoft.

[Other issues]
* | Additional Page Count in Duplex Printing An extra page is added to the end of odd-paged duplex jobs. The added page might be incremented in the printer's counter.

[Application Issues]
* | Microsoft * Microsoft Office XP * - If you are using Office XP, be sure to apply Service Pack 1 or later to avoid printing problems. * MS-Project * - When using with MS-Project, the stripe pattern interval may not print as it appears on your computer screen. If this happens, change the "Graphics Mode". - To print multiple copies from MS-Project, set the number of copies setting in the application print dialog box to 1, and then specify the number of copies using "Copies" setting on the driver's "Setup" tab. * PowerPoint * - PowerPoint may print some graphics objects with the same color although they are in different colors on the computer screen. To solve this problem, change the object's color. * WordPad - When you change the printer properties from WordPad, changes will not be reflected in the print job immediately following the change.
* | Corel * CorelDRAW * - You can not enter the number of copies greater than 9 in the printer driver dialog opened from CorelDRAW 8, due to a problem in CorelDRAW 8. To print more than 9 copies, set the number of copies in the CorelDRAW 8's print dialog. - The printer driver dialog opened from CorelDRAW 8 may show unreadable characters, due to a problem in CorelDRAW 8.
* | Adobe * Acrobat * -In case Acrobat Reader prints unexpected characters or graphics, change the "Graphics Mode" in "Print Quality" tab to "Raster". * Frame Maker * - With Adobe Frame Maker, please use *.FM document to print when "Duplex/Booklet" or "Staple" function is selected. * Page Maker * - PageMaker may not print graphics if a document contains large amount of graphics. To print such documents, change the "Memory Usage" settings to "Font Priority" on the printer operation panel. - PageMaker shifts the image by about an inch with some paper sizes. To solve this problem, print using a different paper size.
* | Kingsoft * WPS * - With WPS, some decorative characters may not print correctly. To avoid this problem, change the "Graphics Mode" to "Raster" and "TrueType Mode" to "Print as Graphics" in the "Print Quality" tab.

All brand names and product names mentioned in this document are trademarks or registered trademarks of their respective companies.