BTN_GUIDE=Troubleshooting Guide
BTN_BUYNOW=Buy Now
BTN_DRVSET=Driver Setting
BTN_PRNSET=Printer Setting
CANCEL_BUTTON=Cancel
CLOSE_BUTTON=Close
ERR_TITLE=Error
OK_BUTTON=OK
BUSY_ERR_TITLE=Printer is busy
BUSY_ERR_MSG=Printer Setting is available when the printer is idle
BLACK_COLOR=Black
CYAN_COLOR=Cyan
MAGENTA_COLOR=Magenta
YELLOW_COLOR=Yellow
ERR_DESCRIPTION=Please refer to Troubleshooting Guide.
TONER_PREPARED=Already prepared for that.
INITIAL_MSG=Please wait...
SM_BLACK_ONLY=Black Only Mode
BTN_ORDERSUPPLIES=Order Supplies
XEROX_LOWTONER_DESC=Replace with Genuine Xerox Toner

UsbCableOff=USB Printer status is not available
NetworkCableOff=Network Printer status is not available
NotSupportedPort=The current printer port is not supported for the printer status
SM_NONDEFINED_ERROR_SHORT=Printer status is not available
SM_JOB_COMPLETE=Your print job is finished
SM_JOB_SAVED=Your print job is saved
Ready=Ready
PowerSave=Power Save mode
Printing=Printing
Warmingup=Warming Up
Recovery=Self Diagnostics
RecoveryTemperature=Self Diagnostics Temperature
RecoveryLSU=Self Diagnostics LSU
PaperJam0MPF=Paper Jam at the Multi-Purpose tray. Open/Close Door
PaperJam0Tray1=Paper Jam at the tray 1. Open/Close Door
PaperJam0Tray2=Paper Jam at the tray 2. Open/Close Door
PaperJam1=Paper Jam inside Printer
PaperJam2=Paper Jam at the paper exit area
DupPathJam0=Paper Jam in duplex path. Check Inside
DupPathJam1=Paper Jam at Rear
MPPaperEmpty=Load Specified Paper in the Multi-Purpose Tray
FirstPaperEmpty=Load Specified Paper in the Tray 1
OptPaperEmpty=Load Specified Paper in the Optional Tray 2
ManualEmpty=Load Specified Paper in the Manual Feed
MPPaperMismatch=Paper Mismatch in the Multi-Purpose Tray
FirstPaperMismatch=Paper Mismatch in the Tray 1
OptPaperMismatch=Paper Mismatch in the Optional Tray 2
ManualMismatch=Paper Mismatch in the Manual Feed
OP2PaperMismatch=Paper Mismatch in the Second Optional Tray
ManualLoad=Press the Stop button (Manual Feed Mode)
NonGenuineToner=Non Genuine Toner
NonGenuineTonerReplaceToner=Non Genuine Toner / Replace Toner
NonGenuineTonerReplaceToner1=Non Genuine Toner / Replace Toner 1
TonerLowReplaceToner=Toner is Low / Replace Toner
TonerExhaustedReplaceToner=Toner is Exhausted / Replace Toner
TonerExhaustedReplaceToner1=Toner is Exhausted / Replace Toner 1
TonerReplace=Replace Toner Kit
TonerLow=Toner is Low
InvalidTonerKitK=Invalid Black Toner Kit
TonerKitNotInstK=Black Toner Cartridge is not installed
FuserHighError=Fuser Over heat Error
FuserLowError=Fuser Low heat Error
FuserOpenError=Fuser Open heat Error
LSUHsyncError=LSU Error
LSUMotorError=LSU Error
CoverOpen=Cover Open
MotorError=Main Motor Locked
IPConflict=IP Address Conflict
FuserDoorOpenError=Fuser Door Is Open. Closer Fuser Door
