[Settings]
DebugOutFile = 0
Move8Unit = 0
XMoveEnable = 1
XMove = 0
Landscape_Compress = 1
COMPRESS_VALUE = 100
TrimLeft = 0
GraphicProcessMethod = 0

[ImageProcess_]
TrimLeft = 0
TrimTop = 0
MoveX = 0
MoveY = 0
CompressRate = 100

///////////////////////////////////////////////////////////////////////////////
[GlobalSettings]
PrinterName = Jolimark MP-200D
MenuVersion = 0
MenuDisplayExe = JMSettingManager2
LogoDisplay = 0
InfoColor = 0
IconScheme = 2
EnterInstruction = 1B 1D 1E 05 01 1B 1D 1F
SaveInstruction = 1B 1D 1E 05 02 1B 1D 1F
InstructionTail = 1B 1D 1F
GetInstructionClass = 1B 1D 1E 05 03
AffirmReadDisable = 0
ReturnPrefix = 1B 1D 1E 05 03
TimeOutItem = 5000
TimeOutPage = 5000
ReadOnLastFail = 1
WriteReadDelay = 50
ReadMenuDelay = 3000
SleepBeforeRead = 1000

///////////////////////////////////////////////////////////////////////////////
/// *********************************************************************** ///
///////////////////////////////////////////////////////////////////////////////
[BaseSection]
ItemCount = 10

[BaseItemME]
Name = Base
Icon = 00_Base
Title.CN = 常用设置
Note.CN = 打开常用设置窗口。
Title.EN = Common use settings
Note.EN = Open the window of Common use setting. 
Title.CHT = 常用設置
Note.CHT = 打開常用設置視窗。


[BaseItem01]
Name = Black_Sign
Icon = 34_Black_Sign
Title.CN = 		黑标
Note.CN =  		功能开启后，可以执行黑标检测指令进行精确竖向定位打印。（打印的纸张必须正面印有黑标）
Title.CHT = 	黑標
Note.CHT =	 	功能開啟後，可以執行黑標檢測指令進行精確豎向定位列印。（列印的紙張必須正面印有黑標）
Title.EN = 		Black Mark
Note.EN =  		Select this function on, printer would carry out black mark detect instruction so that to make the vertical positioning printing precisely. (Bills or papers should have black mark on the surface.)
SetInstruction = 1B 1D 1E 02 0C
GetInstruction = 24
RuleType =		Enum
Rule.CN =			0=关\r  1=开\r
Rule.EN =			0=OFF\r  1=ON\r
Rule.CHT =		0=關\r  1=開\r
Default =			0

[BaseItem02]
Name = Prt_Direction
Icon = 10_Prt_Direction
Title.CN = 		打印方向
Note.CN =  		设置打印方向为双向、单向或按驱程指令自动选择打印方向。
Title.EN = 		Print Dir
Note.EN =  		Set printing direction as unidirectional mode, bidirectional mode or auto mode which is according to the drive instruction. 
Title.CHT = 	列印方向
Note.CHT =  	設置列印方向為雙向、單向或按驅程指令自動選擇列印方向。
SetInstruction = 1B 1D 1E 00 08 
GetInstruction = 07
RuleType =  	Enum
Rule.CN =  		0=双向\r  1=单向\r
Rule.EN =  		0=BI-DIR\r  1=UNI-DIR\r
Rule.CHT =  	0=雙向\r  1=單向\r
Default = 		0

[BaseItem03]
Name = Form_Width
Icon = 42_Form_Width
Title.CN = 		票据宽度
Note.CN =  		根据不同的打印需求选择对应的纸张。
Title.EN = 		Form Width
Note.EN =  		Specify respective paper type according to different printing request. 
Title.CHT = 	票據寬度
Note.CHT =  	根據不同的列印需求選擇對應的紙張
SetInstruction = 1B 1D 1E 02 10
GetInstruction = 28
RuleType =  	Enum
Rule.CN =  		0=76mm\r  1=57mm\r
Rule.EN =  		0=76mm\r  1=57mm\r
Rule.CHT =  	0=76mm\r  1=57mm\r
Default = 		0

[BaseItem04]
Name = Baud_Rate
Icon = 24_Baud_Rate
Title.CN = 		波特率
Note.CN =  		选择串口数据传输速率。
Title.CHT = 	串列傳輸速率
Note.CHT =	 	選擇串口資料傳輸速率。
Title.EN = 		Baud Rate
Note.EN =  		Set the printer serial data transmission rate. 
SetInstruction = 1B 1D 1E 03 01
GetInstruction = 29
RuleType =		Enum
Rule.CN =		7=115200 BPS\r  6=57600 BPS\r  5=38400 BPS\r  4=19200 BPS\r  3=9600 BPS\r  2=4800 BPS\r  1=2400 BPS\r  0=1200 BPS\r
Rule.EN =		7=115200 BPS\r  6=57600 BPS\r  5=38400 BPS\r  4=19200 BPS\r  3=9600 BPS\r  2=4800 BPS\r  1=2400 BPS\r  0=1200 BPS\r
Rule.CHT =     	7=115200 BPS\r  6=57600 BPS\r  5=38400 BPS\r  4=19200 BPS\r  3=9600 BPS\r  2=4800 BPS\r  1=2400 BPS\r  0=1200 BPS\r
Default =		3

[BaseItem05]
Name = Data_Bit
Icon = 26_Data_Bit
Title.CN = 		数据位数
Note.CN =  		选择串口数据位数。
Title.CHT = 	數據位元數
Note.CHT =	 	選擇串口資料位元數。
Title.EN = 		Data Bits
Note.EN =  		Set the printer serial data bits.
SetInstruction = 1B 1D 1E 03 03
GetInstruction = 2B
RuleType =		Enum
Rule.CN =		0=8 位\r  1=7 位\r
Rule.EN =		0=8 BITS\r  1=7 BITS\r
Rule.CHT =     	0=8\r  1=7\r
Default =		0

[BaseItem06]
Name = Protocol
Icon = 28_Protocol
Title.CN = 		协议
Note.CN =  		选择串口数据传输协议为软件控制（XON/XOFF）或硬件控制（DTR）。
Title.CHT = 	協議
Note.CHT =	 	選擇串口資料傳輸協定為軟體控制（XON/XOFF）或硬體控制（DTR）。
Title.EN = 		Protocol
Note.EN =  		Set the printer serial data transmission protocol as software control (XON/XOFF) or hardware control (DTR).
SetInstruction = 1B 1D 1E 03 05
GetInstruction = 2D
RuleType =		Enum
Rule.CN =		0=XON/XOFF\r  1=硬件\r
Rule.CHT =		0=XON/XOFF\r  1=硬體\r
Rule.EN =     	0=XON/XOFF\r  1=DTR\r
Default =		1

[BaseItem07]
Name = Parity
Icon = 25_Parity
Title.CN = 		奇偶校验
Note.CN =  		选择串口数据传输的检错方法。
Title.CHT = 	奇偶校驗
Note.CHT =	 	選擇串口資料傳輸的檢錯方法。
Title.EN = 		Parity
Note.EN =  		Set the printer serial data transmission error detection method. 
SetInstruction = 1B 1D 1E 03 02
GetInstruction = 2A
RuleType =		Enum
Rule.CN =		0=无\r  1=奇\r  2=偶\r
Rule.CHT =		0=無\r  1=奇\r  2=偶\r
Rule.EN =     	0=NONE\r  1=ODD\r  2=EVEN\r
Default =		0

[BaseItem08]
Name = Stop_Bit
Icon = 27_Stop_Bit
Title.CN = 		停止位数
Note.CN =  		选择串口数据传输停止位位数。
Title.CHT = 	停止位數
Note.CHT =	 	選擇串口資料傳輸停止位位數。
Title.EN = 		Stop Bits
Note.EN =  		Set the printer serial data transmission stop bits.
SetInstruction = 1B 1D 1E 03 04
GetInstruction = 2C
RuleType =		Enum
Rule.CN =		0=1 位\r  1=2 位\r
Rule.CHT =		0=1\r  1=2\r
Rule.EN =     	0=1 BIT\r  1=2 BITS\r
Default =		0

[BaseItem09]
Name = Black_Sign_Mode
Icon = 34_Black_Sign
Title.CN = 		黑标模式
Note.CN =  		黑标模式1，当黑标检测功能开时，有纸状态开机执行退纸1.4英寸。
Title.CHT = 	黑標模式
Note.CHT =	 	黑標模式1，當黑標檢測功能開時，有紙狀態開機執行退紙1.4英吋。
Title.EN = 		Black Mark Mode
Note.EN =  		Black mark mode 1, when the function of black mark detection is enabled, turning on the printer will eject paper 1.4 inch if there is paper in the printer.
SetInstruction = 1B 1D 1E 04 22
GetInstruction = 4F
RuleType =		Enum
Rule.CN =			0=模式0\r  1=模式1\r
Rule.EN =			0=Mode 0\r  1=Mode 1\r
Rule.CHT =		0=模式0\r  1=模式1\r
Default =			0

[BaseItem10]
Name = High_Quality
Icon = 15_High_Quality
Title.CN = 		打印质量
Note.CN =  		功能开启后，增强打印的清晰度（打印速度会下降）。
Title.EN = 		High Density
Note.EN =  		Select this function on, printing definition is enhanced while the print speed is reduced.
Title.CHT = 	列印質量
Note.CHT =  	功能開啟後，增強列印的清晰度，列印速度下降。
SetInstruction = 1B 1D 1E 04 26
GetInstruction = 51
RuleType =  	Enum
Rule.CN =  		1=正常\r  0=信函\r
Rule.CHT =  	1=正常\r  0=信函\r
Rule.EN =  		1=Normal\r  0=Letter\r
Default = 		1

///////////////////////////////////////////////////////////////////////////////

