;
; Fehlermeldungen fuer ACCON-AGLink
;
; Jede Zeile die nicht mit einer Zahl beginnt wird als Kommentar gewertet
;
; Zwischen der Fehlernummer und dem Fehlertext muss ein Semikolon stehen
;
0;No error
-256;Parameter error
-255;program termination request
-254;invalid function
-253;Device already in use
-252;Device not found
-251;Device already opened
-250;Unable to allocate memory
-249;Could not create device class
-248;No space in request queue
-247;Open device failed: At least one invalid parameter
-246;Invalid job number
-245;Internal error! Please contact InCoSol
-244;Function not supported
-512;Requested option not available
-511;Invalid parameter length
-510;Parameter has been changed to valid value
-509;Unable to open "AGLink_Config.EXE"
-508;Unable to change all parameters since adapter is already initialised
-768;Timeout on waiting for start STX
-767;Received invalid character instead of STX
-766;Timeout on waiting response packet
-765;Timeout on waiting next character of packet
-764;Invalid character after first DLE
-763;Timeout on waiting for checksum character
-762;Chechsum error
-761;Invalid protocol state
-760;Conflict during initialization
-759;Timeout on waiting for DLE after sending STX
-758;Timeout after confilict at initialization 
-757;Received NAK instead of DLE
-756;Received invalid character after sending STX
-755;Packet to send is invalid (NULL pointer or zero length )
-754;Timeout on waiting for DLE after sent packet
-753;Receive buffer to small for received packet
-752;Send buffer to small to send packet
-1024;Received packet has invalid contents
-1023;The requested adapter address already existing
-1022;The address is higher than the highest station address (HSA)
-1021;Invalid MPI baudrate
-1020;Unknown error code from adapter
-1019;Adapter is not initialized
-1280;No connection to request PLC
-1279;Unable to establish further connections
-1278;PLC not found
-1277;Frame number doesn't match
-1276;Hardware error 
-1275;No data, e.g. data block doesn't exists
-1274;Internal error. Please contact InCoSol
-1273;PLC has wrong operating state
-1272;Error during coldstart the PLC
-1271;Error during restart the PLC
-1270;Wrong operation state of PLC
-1269;Invalid operand size (internal error, please contact InCoSol!)
-1268;Unknown error code from PLC (please contact InCoSol!)
-1267;Data currently not available
-1266;Unsupported context
-1265;Unsufficient access rights for this operation
-1264;No data from PLC
-1263;Context not supported
-1262;Invalid address
-1261;Access to object not allowed
-1260;Data type not supported
-1536;Unspecific error from modem
-1535;Unable to hang up modem
-1534;Error on basic initialization (AT&FE0V1)
-1533;Error on initialization sequence 1
-1532;Error on initialization sequence 1
-1531;Error on initialization sequence 1
-1530;Error on initialization sequence 1
-1529;Error on setting dail mode
-1528;Error on setting dail tone
-1527;Error on setting response mode
-1526;No modem found on configured COM line
-1525;No connection
-1524;No carrier sense signal
-1523;No data set ready signal (Modem offline)
-1792;Required device driver not found
-1791;Required board not found
-1790;Error from CIF interface dll
-1789;CIF card has wrong hardware version 
-1788;CIF card has wrong firmware version
-1787;Resource conflict
-1786;CIF card not in logical token ring
-2048;Unable to open socket interface
-2047;Invalid IP address
-2046;Failed to establish IP connection
-2045;Timeout on establishing IP connection
-2044;Received Close instead of ConnectOK (wrong rack and/or slot number)
-2043;Send error on TCP/IP level
-2042;Send timeout on TCP/IP-Ebene
-2041;Received Close instead of WriteOK
-2040;Receive error on TCP/IP level
-2039:Receive timeout on TCP/IP level
-2038;Received Close instead of ReadOK
-2037;Try to connect to PLC