==================================================
License Agreement for DocuPrint C2255 PCL 6
==================================================

** Terms and Conditions **

1. PROPRIETARY RIGHTS: Title, ownership rights, and intellectual
   property rights in the SOFTWARE shall remain in Fuji Xerox and
   its third party suppliers.  You have no rights in the SOFTWARE
   except as expressly granted in accordance with this agreement.

2. LICENSE:  Under this agreement, you are granted a non-exclusive
   license to use the SOFTWARE for the purpose of using with
   compatible Fuji Xerox products.  You are not permitted
   to (1) assign, sublicense, sell, rent, lease, convey, or transfer
   the SOFTWARE to any third party by any tangible media such as
   floppy disk, magnetic tape, or CD-ROM, (2) distribute the SOFTWARE
   on a network or by a telephone line available to the public or (3)
   alter, modify, decompile, disassemble, reverse engineer, or create
   derivative works based on the whole or any part of the SOFTWARE.
   If any direction on usage or restriction for the SOFTWARE is
   expressly specified, you are required to follow
   such direction.

3. TERM: This agreement is effective upon installing the SOFTWARE
   until you terminate the agreement by destroying the SOFTWARE.
   This agreement will also terminate if you fail to abide by any
   terms of this agreement.  In case of termination, you must
   promptly destroy the SOFTWARE.

4. LIMITED WARRANTIES: THE SOFTWARE IS SUPPLIED STRICTLY ON AN
   'AS IS' BASIS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT
   TO THE SOFTWARE. YOU ARE RESPONSIBLE FOR CHOOSING, MAINTAINING AND
   MATCHING OTHER HARDWARE AND SOFTWARE COMPONENTS IN COMBINATION OF
   THE SOFTWARE.  IN NO EVENT, SHALL FUJI XEROX, FUJI XEROX CHANNEL
   PARTNERS, AUTHORIZED DEALERS AND THEIR THIRD PARTY SUPPLIERS BE
   LIABLE FOR ANY LOSS OR DAMAGE INCLUDING INCIDENTAL OR
   CONSEQUENTIAL LOSS OR DAMAGE, ARISING FROM USE OF OR INABILITY TO
   USE SOFTWARE, OR ANY MODIFICATION OF THE SOFTWARE.

5. EXPORT CONTROL: You are not allowed to export the SOFTWARE in part
   or whole, directly or indirectly, in violation of any
   restrictions, laws or regulations imposed by the government of
   respective countries, and are required to obtain
   necessary approval prior to exporting the SOFTWARE.


=====================================================================
FX DocuPrint C2255 PCL 6
Printer Driver Version  2.6.6 for
        Windows(R) XP Professional x64 Edition,
        Windows Server(R) 2003 x64 Editions,
        Windows Vista(R) x64 Editions
        Windows Server(R) 2008 x64 Editions
        Windows(R) 7 x64 Editions
        Windows Server(R) 2008 R2
        Windows(R) 8 x64 Editions
        Windows Server(R) 2012
=====================================================================

This document provides information about the printer driver on the
following items:
1. Requirements
2. Installation
3. Limitations
4. Version Improvements

-----------------
 1. Requirements
-----------------

 * Please note that this printer driver operates on a computer with a
   64-bit x64-based microprocessor (AMD64 or Intel EM64T) and an
   upward-compatible processor, running Windows(R) XP Professional x64 Edition,
   Windows Server(R) 2003 x64 Editions, Windows Server(R) 2008 x64 Editions,
   Windows Vista(R) x64, Windows(R) 7x 64Edition or Windows Server(R) 2008R2,
   Windows(R) 8 x64 Editions or Windows Server(R) 2012.
   

-----------------
 2. Installation
-----------------
Follow the instructions below to install PCL 6 printer drivers.


Important
----------
* Close all the running applications before installing the printer 
  driver.  
* Always reboot the computer after installing an upgraded version of 
  the printer driver.  
* If you have deleted an older version of the printer driver, always 
  reboot the computer before installing the new version.  
* The installation procedures are written with the assumption that
  standard settings have been configured in Windows.
  The procedures may differ if the start menu or folder options have
  been changed.  
* You may not be able to install correctly if installation is made 
  using Power User rights. Re-install as an Administrator.
* Installation may not be successful if this driver is not installed
  using the following procedure.
* Please refer to the following section of this chapter for driver 
  deletion method under Windows Vista, Windows Server 2008, Windows 7, 
  Windows Server 2008 R2, Windows 8, and Windows Server 2012.
   * About driver deletion method (When using Windows Vista, 
     Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8,
     or Windows Server 2012)
* Please refer to the following section of this chapter for installation 
  method using plug-and-play under Windows 7, Windows Server 2008 R2, 
  Windows 8 and Windows Server 2012.
   * About driver installation method using plug-and-play (When using 
     Windows 7, Windows Server 2008 R2, Windows 8, or Windows Server 2012)

1) Double-click the downloaded compressed file (.Exe format) to 
   decompress.  
2) Activate the "Add Printer Wizard".  
   2a) For Windows XP, click the "Start" button.  Point to
       "Settings" and click "Printers and Faxes".  
       Click the "Add a printer" icon.  
   2b) For Windows Server 2003, click the "Start" button.  Point to 
       "Settings" and click "Printers and Faxes".  
       Double-click the "Add Printer" icon.  
   2c) The following steps are available for use when installing 
       printer under Windows Vista and Windows Server 2008.
       * Click "Start" button and then click "Control Panel".
       * Select "Printer" in "Hardware and Sound" then select 
       "Add a Printer".
     <Caution> If you are using Windows Server 2008, right-click in
     "Printers" folder and select "Add Printer" in 
     "Run as administrator".
   2d) The following steps are available for use when installing 
        printer under Windows 7 or Windows Server 2008 R2. 
       * Click "Start" button and then click "Devices and Printers".
       * Select "Add a printer" in "Devices and Printers".
   2e) The following steps are available for use when installing 
        printer under Windows 8 or Windows Server 2012.
       * Go to "Control Panel" >"Hardware and Sound" > "Devices and Printers".
       * Select "Add a printer" in "Devices and Printers".
3) Specify the printer connection.
   * For a local printer:
     Specify the local printer going through the menu displayed on Windows.
     Proceed to step 4).  
   * For a network printer:
     Specify the desired printer from the network going through the menu
     displayed on Windows.
     Contact the network administrator if you have any queries.
     Proceed to step 11).  
4) Specify the printer port.  
   Create a port if there is no output port.
5) Click "Have Disk" from the "Add Printer Wizard" screen.  
   An "Install From Disk" screen is displayed.  
   Specify the directory containing the uncompressed files in step 1)
   in the "Copy manufacturer's files from" box.  Click "OK". 

6) A list of printers is displayed.  Select the desired printer.  
   If the selected printer is already installed, a message asking 
   whether to replace the existing driver is displayed.  
   When installing a new version of the printer driver, select 
   "Replace existing driver" or "Replace the current driver".  
   The older version of the driver cannot be deleted if it is used 
   in an application.  In this case, close the application. 
7) A dialog box for specifying the printer name is displayed.  
   To change the printer name, enter any name in the "Printer name" 
   box. 
   If other printers are installed, a message asking whether to set 
   this as the default printer is shown.  
   7a) When using Windows XP or Windows Server 2003,
       please click "Yes" button if you want to set a printer as 
       default.
   7b) When using Windows Vista, Windows Server 2008, Windows 7,
       Windows Server 2008 R2, Windows 8, or Windows Server 2012, please check
       the "Set as the default printer" checkbox if you want to set a printer
       as default. 
       As the following steps are slightly different for Windows Vista,
       Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8,
       and Windows Server 2012, please proceed to step 13).
8) Specify whether to share this printer with other network users.  
9) A dialog box specifying whether to print the test page after 
   installation is shown.
    To perform test printing on the print driver, load letter paper
    to the printer, select "Yes" and then "Next". 
    Select "No" and click "Next" if you do not wish to print the test
    page.
10) A dialog box to confirm the settings is displayed.  Click 
    "Finish" after confirming the settings.
11) A dialog box to confirm the continuation of installation may be displayed.
    If the dialog box is not displayed, go to the next step.
    For Windows XP and Windows Server 2003, a message saying
    that it did not pass the Windows Logo Test will be displayed
    but this does not cause functional problem.
    Click "Continue Anyway".  
12) The necessary files are copied and a new printer icon is 
    created.  
    If you have printed the test page, a printer test result 
    confirmation message is displayed.  
    This completes the installation.  
13) For Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2,
    Windows 8, and Windows Server 2012, this is the start of the driver
    installation.
    * The installation confirmation screen published by Fuji Xerox Co., Ltd.
      may be displayed, but it is not a functional problem.
      Click "Install".
    * You can continue with the installation in the "User Account Control"
      dialog box.
    Click the "Continue" button to proceed. For users without 
    administrator rights who wish to install the driver, 
    select the option of user with administrator rights,
    enter the password and then click "OK". 
    "User Account Control" dialog is not displayed when the driver is 
    installed through "Run as Administrator".
14) Please ignore the pop-up dialogue of "Windows can't verify 
    the publisher of this software" if it appears.  When you find the dialog, 
    click "Install this driver software anyway." to continue with
    the installation.
       * A message "Windows can't verify the publisher of this driver software"
         appears depending on the version of Windows.
15) Make sharing settings.  
    If the driver is installed with administrator rights, a dialog to make 
    sharing settings appears.  Make sharing settings in this dialog and 
    click "Next".  
16) The driver installation is completed.
    Click "Print a test page" button if you want to print a test page. 
    Please refer to step 9) for the details of test page printing.

    Next, we set the installed printer options.

17) Right-click the printer icon, and select "Properties" from the 
    right-click menu.  
18) Click the "Options" tab.
    Make settings when the "Options" tab is displayed.

About driver deletion method 
(When using Windows Vista, Windows Server 2008, Windows 7,
Windows Server 2008 R2, Windows 8, or Windows Server 2012)
--------------------------------------------------------------
To remove drivers from system completely, please delete drivers and driver 
package going through the following steps.
Please note that driver package can not be deleted by executing driver 
uninstall tool.

  <<Windows Vista, Windows Server 2008>>
   * Click "Start" and open "Control Panel", then select "Printer" in
     "Hardware and Sound" panel.
   * Delete printer icon in "Printers" folder.
   * Right-click in "Printers" folder and select "Run as 
     Administrator".
     Click "Server Properties" then "Printer Server Properties" 
     window is displayed.
   * Select the driver to be deleted from the "Drivers" tab and click 
     "Remove" button.
   * Select "Remove driver and driver package.", then click "OK" 
     button.
   * When the driver is in use, a message appears and the driver package
     may not be able to be deleted.  In such case, reboot the computer and 
     try to delete again.   
   * Restart the computer.

  <<Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012>>
  <<Windows 7, Windows Server 2008 R2>>
  * Click "Start" and select "Devices and Printers".  
  <<Windows 8, Windows Server 2012>>
  * Go to "Control Panel" > "Hardware and Sound" and select "Devices and 
    Printers".
  * Click the printer icon in the "Devices and Printers" folder, 
    and select "Remove device" menu to delete it.   
  * Click any of the icons displayed in "Printers and Faxes" in the
    "Devices and Printers" folder and select "Print server properties".  
  * Click the "Drivers" tab to open it.  
  * When the "Change Driver Settings" button is displayed, click it.  
  * Select a driver to delete from the "Drivers" tab and click the "Remove" 
    button.  
  * Select "Remove driver and driver package" and click the "OK" button.  
  * When the driver is in use, a message appears and the driver package
    may not be able to be deleted.  In such case, reboot the computer and 
    try to delete again.   
  * Restart the computer.


About driver installation method using plug-and-play
(When using Windows 7, Windows Server 2008 R2, Windows 8, 
Windows Server 2012)
-------------------------------------------------------------

When a driver is installed using plug-and-play, it may not
be installed properly.  In such case, follow the steps below to reinstall
the driver.

  * Select "Devices and Printers".
  * In the "Devices and Printers" folder, right-click the icon of this 
    printer and select "Properties".  
    *When the icon is disabled and inoperable, turn off/on the printer
     and make sure the printer is connected securely with a cable.  
  * Select this printer in "Device Functions" in the "Hardware" tab, and
    click the "Properties" button to open the Properties dialog. 
  * Click the "Change settings" button and open a new "Properties" dialog.  
  * In the new "Properties" dialog, open the "Driver" tab, and click the 
    "Update driver" button to open the "Update driver software" dialog.  
  * Select "Browse my computer for driver software" and specify 
    the driver's location under "Search for driver software in this 
    location:". Click "Next".
    *Please refer to the steps for driver installation using "Add Printer 
     Wizard" for how to prepare the driver.   
  * When a message stating that the driver has been updated successfully,  
     click "Close" to close the dialog.  
     Now, the driver has been reinstalled successfully.  


----------------
 3. Limitations
----------------
============================
Driver-Specific Limitations
============================

When installing multiple drivers to a single SMB port
=====================================================
When installing multiple drivers to a single SMB port, follow the
procedure mentioned below.
  1) Double-click the "Add Printer" icon to display the "Add Printer
     Wizard" screen.  
     Activate the "Add Printer Wizard" and click "Next".
  2) Select "Local Printer" and click "Next".
  3) Select the SMB port to be connected from "Available
     ports" and click "Next".
  4) Double-click "Have Disk", specify the folder in which you have
     saved the driver and carry out the installation as per the
     instructions.

When shared printer clients use an OS other than the one supported
by the main driver, substitute drivers for every OS are required.
Make sure this substitute driver's version is the same as the main driver.
Substitute drivers cannot be installed if the version is different.

Also, shared printer clients cannot use the following OS.
* Windows XP before SP2
* Windows Server 2003 before SP1
* Windows 2000
When these OS are used as client to install shared printers,
Properties from Printer Folder can no longer be opened.

Local Printer for Windows XP, Windows Server 2003
==================================================
When "\\server\printer\ (LAN Manager port)" is used in the local 
printer for Windows XP and Windows Server 2003, if printing is 
executed when the printer is offline, the local printer may not
be able to recover from the offline mode.
If this happens, delete the LAN Manager port and reset the local
printer settings.
If LAN Manager port is used in the network printer, there should not
be any problem.
When setting the local printer, use other ports except LAN Manager
or delete the existing LAN Manager port before creating the
"\\server\printer (local port)" at the "New Port" of the
"Add Printer Wizard".

Installing network printer in Microsoft Windows Vista(R) and
Microsoft Windows Server(R) 2008
============================================================
* When installing network printer by "Run as Administrator", the
  printer may be added under the administrator account used for
  installation and not under the current user.

Driver installation by remote access on Microsoft Windows Vista(R)
and Microsoft Windows Server(R) 2008
===================================================================
In the case of driver installation by remote access on Windows Vista
or later versions, the process may not end normally.  In such case,
try again on Windows XP.

Notice to the users in the Microsoft Windows Server 2003/2008
cluster environment
=============================================================
* Use the following OS for Client.
  Microsoft(R) Windows(R) XP (English/Korean/Simplified Chinese/
  Traditional Chinese version)
  Microsoft(R) Windows Server(R) 2003 (English/Korean/Simplified Chinese/
  Traditional Chinese version)
  Microsoft(R) Windows Server(R) 2008 (English/Korean/Simplified Chinese/
  Traditional Chinese version)
  Microsoft(R) Windows Vista(R) (English/Korean/Simplified Chinese/
  Traditional Chinese version)

* When you specify Custom Paper Size in the cluster environment,
  make same setting at all of the physical node in the environment.

* When clicking the "Get Information from Printer" button,
  if the "Search Printer" dialog is displayed, select "Specify Address"
  and enter the network address of the printer.

* Driver Installation in the cluster environment
(A) Microsoft Windows Server 2008
    Install the driver on each of standby node and active node, and
    then install it on virtual server.

(B) Microsoft Windows Server 2003
    Install the driver on virtual server.

* Deletion of driver in the cluster environment
Microsoft Windows Server 2003/2008
  Delete the driver on virtual server, and then delete it on each
  standby node.
  To delete driver on standby node
  ----------
  (b-1) Change standby node to active node.
  (b-2) Install a printer on virtual server.
  (b-3) Delete the driver on the virtual server.

  To delete driver
  ----------
  Delete printer icon first and delete the driver from "Server Properties".
  Then reboot the computer.

About the "Cancel" button of "Enter User Details" dialog
========================================================
When printing after "Prompt User for Entry when Submitting Job" 
is set in "Detailed User Settings" dialog and the "Enter User Details" dialog
is cancelled, a warning dialog is displayed.
It may indicate a printer error message, although there is no error
in the printer.
In this case, ignore the warning message and continue operation.

Number of Copies
================
This driver allows you to print from 1 to 999 copies.  Only one
copy will be printed if the number of copies specified exceeds this
range.

Watermark Printing
==================
When performing watermark printing with "Transparent" specified,
some of the colors that appear on the screen may be different when
actually printed.

For Windows XP SP2, Windows Server 2003 SP2, Windows Server 2008, 
Windows Vista and Windows 7.
"Watermarks" cannot be used from a 32-bit application when 
"Advanced Settings" tab's "EMF Spooling" is set to "Not Available".
Please set "EMF Spooling" to "Available" before using.

About Restrict Annotation Setting
=================================
For Windows XP SP2, Windows Server 2003 SP2, Windows Server 2008, Windows Vista
and Windows 7.
"Restrict Annotation Setting" cannot be used from a 32-bit application
when "Advanced Settings" tab's "EMF Spooling" is set to "Not Available".
Please set "EMF Spooling" to "Available" before using.

Print Booklet and Print Header/Footer functions
===============================================
When the page number printing is simultaneously specified for Print
Booklet function and Print Header/Footer function, the page
numbers may not be printed properly.

Limitations during EMF Spooling
===============================
When the "EMF Spooling" on the "Detailed Settings" tab is set to "On",
the following functions may not operate properly.
When using these functions, set the "EMF Spooling" to "Off".
* "Secure Print","Sample Print"
* "Enable Account Setup" and "User Details Setup"
* "Create/Register Forms"
* "Covers/Separators"'s "Insert Separators"
* "Use Extended Features From Application"
* "Specify Margin"

Printing Huge Print Data
========================
For some applications, if a pasted image is printed at high
resolution, the print data expands and may result in an extremely
slow printing speed.
The print data size of the output may be improved by changing the
following settings of "Other Settings (Graphics Settings)" on
the "Detailed Settings" tab.
* Change "Resolution".
* Change "Image Compression".

Skip Blank Pages
================
Even with "Skip Blank Pages" selected, blank pages may still be
printed in the following situations.

* The page contains only line feeds.
* The page contains only spaces.
* The page contains only line feeds and spaces.
* A white background drawing instruction is sent from the
  application.

Font Substitution
=================
If a size equal or larger than 36 points is specified, the document
may be printed with incorrect font substitution.

Missing Items in the Printout
=============================
In some applications, images may be missing in the printout.
If this happens, activating EMF spooling as shown below may remove
the problem.

* Set "EMF Spooling" to "On" on the "Detailed Settings" tab.

Custom Paper Size
=================
Administrator rights are necessary for changing the setting of
Custom Paper Size.
When using Windows Vista or Windows Server 2008, please modify
printer properties according to the following steps.
* Select the printer from the printer folder.
* Right-click the printer, click "Run as administrator" and then 
  select "Properties".
* Click the "Continue" button in the "User Account Control" dialog
  box, and from the displayed properties, configure the settings.

For Windows 7, select the printer from the "Devices and Printers" folder,
and select "Properties".  On the "Sharing" tab, click the "Change 
Sharing Options" button.
After that, specify custom page size.  

Favorites
=========
When only a margin setting is changed, "Change" is not displayed in
the "Favorites" combo box.

Printer Error
=============
An error may occur at the printer if one of the following situations
occurs during printing.  Follow the instructions on the printer UI or
the user guide to resolve the error.

* Driver properties from the application program are not displayed.
* Printer settings on the application program are not reflected in
  the driver properties when displayed.
* Printer settings are changed midway in a document.  (E.g. document
  which has different paper sizes for every page.)
* Continuous printing from multiple application programs.
* When an optional device that was not installed to the printer was
  specified at the "Options" tab.

Compatibility with Printer Font
===============================
If a document using the printer fonts of other machine models is
printed through this driver, then the results of printing will
be different.

Print Overlay
=============
The alphabetical "Form Name" specified in the "Print Overlay" is
case sensitive.
Specify the correct case sensitive form name registered in the
printer.

As some applications paint the background in white to print, forms
with overlay may be hidden.  Such applications include Internet
Explorer and WordPad.

About searching for a printer by "Community Name"
=================================================
With the default setting of firewall on Windows Vista and Windows
Server 2008, you can't search for a printer across subnets by
"Broadcast".In this case, please specify the address directly
by selecting "Specify Address".

===================
Client Environment
===================

Multi-language Document
=======================
If a multi-language document is created using the multi-language
support function, you should select "Always Use TrueType Fonts" on
the "Fonts" dialog box before printing. When printing with printer
fonts, non-Japanese texts such as Greek, Croatian, etc. may be
printed incorrectly.

Notes on Windows 8
=======================
* On Windows 8, Annotation and Watermark may not be printed even if 
 [Header/Footer Options] and [Watermarks] are specified.
 To make them function, set [EMF Spooling] to [Available] on the 
 [Advanced Settings] tab.

* When printing from the application running in the new UI environment 
  suitable for touch controls, which was introduced on Windows 8, if 
  [Black and White] is displayed as Output Color on the printing setting 
  screen, which is displayed after a printer is selected from the device 
  charm, the output will be in black and white even if the setting is 
  changed to [Color].
  To output in color, open [Devices and Printers] on Windows desktop, 
  right-click on the printer you use to select [Printing Preferences], 
  and in the [Default Setting] dialog, change [Output Color] on the 
  [Paper / Output] tab back to [Color].

-------------------------
 4. Version Improvements
-------------------------
This section describes the modifications made for each upgraded
version.


Improvements from Ver 2.6.3
----------------------------
* Windows 7 has been supported.
* Fix the issue of the TrueType Glyph problem
* Fix the issue that personal setting informatio will be lost at the time of shared
  printer icon deletion.
* Fixed the issue that printing may not be performed normally through
  the application programs or services running on Local System Account.
* Fixed the issue that the driver may not be upgraded correctly and printing
  may be disabled when a shared printer is used on Windows2000 terminal server.
* Fixed the problem that an error would occur when a printer was installed
  in the environment of using a printer with an alternative driver added.
* Fixed the problem that the settings of "User Details Setup" would be initialized
  when a user logged in again using a session printer
  in the Citrix Presentation Server? and XenApp? environment.
* Fixed the problem that printing may be disabled by a printer error when outputting
  from a specific application.
* Fixed the issue that a paper ratation function doesn't work normally.

Improvements from Ver 2.6.4
----------------------------
* Windows 8 has been supported.
=====================================================================
"Microsoft", "Windows", "Windows Server" "Windows Vista" 
are registeredtrademarks of Microsoft Corporation in the 
United States and other countries.
"Intel" and "Pentium" are registered trademarks of Intel
Corporation, U.S.A.
Other product names and companies' names are the registered
trademarks or trademarks of their respective owners.

Copyright (C) 2009-2012 Fuji Xerox Co., Ltd.  All rights reserved.
