1) Install any of Camnetics2010 programs: CamTrax2010, GearTrax2010, GearTeq2010

此Crack支持以下几个软件：

CAMTrax 2010 
CAMTraxMFG 2010
GearTrax 2010
GearTeq 2010

安装以上任意软件后，按下列对应说明破解！！
9cax.com


2) For CamTrax2010
Run this patch, browse to <CamTrax2010 program directory>, select "CamTrax2010.dll" and click "Start > OK"
Run this patch, browse to <CamTrax2010 program directory>, select "CamTrax2010.exe" and click "Start > OK"

3) For CAMTrax MFG (Standalone) 2010
Run this patch, browse to <CamTraxMFG program directory>, select "CamTraxMFG.exe" and click "Start > OK"

4) For CearTrax2010
Run this patch, browse to <GearTrax2010 program directory>, select "GearTrax2010.dll" and click "Start > OK"
Run this patch, browse to <GearTrax2010 program directory>, select "GearTrax2010.exe" and click "Start > OK"

5) For GearTeq2010
Run a program, Select "Full License", Select "Use a SolidWorks Serial"

Input a GearTeq2010 RegCode witch corresponds to your SW Serial

SW Serial                        GearTeq2009 RegCode
0101 0000 1289 1488  ->  IpMK KUKS SKWA
0001 0001 0736 0361  ->  2QQC 6W6I QC86
9916 5719 6888 1432  ->  fQOl bflh fKdd

That'a all.. Enjoy :)

Cracked by TuPis

P.S. 
1) You can run CamTrax2010 and  GearTrax2010 from Start > All Programs > Camnetics >...
2) Also you can add CamTrax2010 and  GearTrax2010 to SW add-in.
 To make it:
Start SW
Click "Open" > Select "File type" to be opened- SW add-in (*.dll) > browse to <CamTrax2010 program directory>\CamTrax2010.dll > OK
Click "Open" > Select "File type" to be opened- SW add-in (*.dll) > browse to <GearTrax2010 program directory>\GearTrax2010.dll > OK

After that a "Camnetics" drop-down menu will appear in you SolidWorks Main Menu